Node.js v14.0.0-rc.2 Documentation


Async Hooks#

Stability: 1 - Experimental

The async_hooks module provides an API to track asynchronous resources. It can be accessed using:

const async_hooks = require('async_hooks');

Terminology#

An asynchronous resource represents an object with an associated callback. This callback may be called multiple times, for example, the 'connection' event in net.createServer(), or just a single time like in fs.open(). A resource can also be closed before the callback is called. AsyncHook does not explicitly distinguish between these different cases but will represent them as the abstract concept that is a resource.

If Workers are used, each thread has an independent async_hooks interface, and each thread will use a new set of async IDs.

Public API#

Overview#

Following is a simple overview of the public API.

const async_hooks = require('async_hooks');

// Return the ID of the current execution context.
const eid = async_hooks.executionAsyncId();

// Return the ID of the handle responsible for triggering the callback of the
// current execution scope to call.
const tid = async_hooks.triggerAsyncId();

// Create a new AsyncHook instance. All of these callbacks are optional.
const asyncHook =
    async_hooks.createHook({ init, before, after, destroy, promiseResolve });

// Allow callbacks of this AsyncHook instance to call. This is not an implicit
// action after running the constructor, and must be explicitly run to begin
// executing callbacks.
asyncHook.enable();

// Disable listening for new asynchronous events.
asyncHook.disable();

//
// The following are the callbacks that can be passed to createHook().
//

// init is called during object construction. The resource may not have
// completed construction when this callback runs, therefore all fields of the
// resource referenced by "asyncId" may not have been populated.
function init(asyncId, type, triggerAsyncId, resource) { }

// Before is called just before the resource's callback is called. It can be
// called 0-N times for handles (e.g. TCPWrap), and will be called exactly 1
// time for requests (e.g. FSReqCallback).
function before(asyncId) { }

// After is called just after the resource's callback has finished.
function after(asyncId) { }

// Destroy is called when an AsyncWrap instance is destroyed.
function destroy(asyncId) { }

// promiseResolve is called only for promise resources, when the
// `resolve` function passed to the `Promise` constructor is invoked
// (either directly or through other means of resolving a promise).
function promiseResolve(asyncId) { }

async_hooks.createHook(callbacks)#

Registers functions to be called for different lifetime events of each async operation.

The callbacks init()/before()/after()/destroy() are called for the respective asynchronous event during a resource's lifetime.

All callbacks are optional. For example, if only resource cleanup needs to be tracked, then only the destroy callback needs to be passed. The specifics of all functions that can be passed to callbacks is in the Hook Callbacks section.

const async_hooks = require('async_hooks');

const asyncHook = async_hooks.createHook({
  init(asyncId, type, triggerAsyncId, resource) { },
  destroy(asyncId) { }
});

The callbacks will be inherited via the prototype chain:

class MyAsyncCallbacks {
  init(asyncId, type, triggerAsyncId, resource) { }
  destroy(asyncId) {}
}

class MyAddedCallbacks extends MyAsyncCallbacks {
  before(asyncId) { }
  after(asyncId) { }
}

const asyncHook = async_hooks.createHook(new MyAddedCallbacks());
Error Handling#

If any AsyncHook callbacks throw, the application will print the stack trace and exit. The exit path does follow that of an uncaught exception, but all 'uncaughtException' listeners are removed, thus forcing the process to exit. The 'exit' callbacks will still be called unless the application is run with --abort-on-uncaught-exception, in which case a stack trace will be printed and the application exits, leaving a core file.

The reason for this error handling behavior is that these callbacks are running at potentially volatile points in an object's lifetime, for example during class construction and destruction. Because of this, it is deemed necessary to bring down the process quickly in order to prevent an unintentional abort in the future. This is subject to change in the future if a comprehensive analysis is performed to ensure an exception can follow the normal control flow without unintentional side effects.

Printing in AsyncHooks callbacks#

Because printing to the console is an asynchronous operation, console.log() will cause the AsyncHooks callbacks to be called. Using console.log() or similar asynchronous operations inside an AsyncHooks callback function will thus cause an infinite recursion. An easy solution to this when debugging is to use a synchronous logging operation such as fs.writeFileSync(file, msg, flag). This will print to the file and will not invoke AsyncHooks recursively because it is synchronous.

const fs = require('fs');
const util = require('util');

function debug(...args) {
  // Use a function like this one when debugging inside an AsyncHooks callback
  fs.writeFileSync('log.out', `${util.format(...args)}\n`, { flag: 'a' });
}

If an asynchronous operation is needed for logging, it is possible to keep track of what caused the asynchronous operation using the information provided by AsyncHooks itself. The logging should then be skipped when it was the logging itself that caused AsyncHooks callback to call. By doing this the otherwise infinite recursion is broken.

Class: AsyncHook#

The class AsyncHook exposes an interface for tracking lifetime events of asynchronous operations.

asyncHook.enable()#

Enable the callbacks for a given AsyncHook instance. If no callbacks are provided enabling is a noop.

The AsyncHook instance is disabled by default. If the AsyncHook instance should be enabled immediately after creation, the following pattern can be used.

const async_hooks = require('async_hooks');

const hook = async_hooks.createHook(callbacks).enable();

asyncHook.disable()#

Disable the callbacks for a given AsyncHook instance from the global pool of AsyncHook callbacks to be executed. Once a hook has been disabled it will not be called again until enabled.

For API consistency disable() also returns the AsyncHook instance.

Hook Callbacks#

Key events in the lifetime of asynchronous events have been categorized into four areas: instantiation, before/after the callback is called, and when the instance is destroyed.

init(asyncId, type, triggerAsyncId, resource)#
  • asyncId <number> A unique ID for the async resource.
  • type <string> The type of the async resource.
  • triggerAsyncId <number> The unique ID of the async resource in whose execution context this async resource was created.
  • resource <Object> Reference to the resource representing the async operation, needs to be released during destroy.

Called when a class is constructed that has the possibility to emit an asynchronous event. This does not mean the instance must call before/after before destroy is called, only that the possibility exists.

This behavior can be observed by doing something like opening a resource then closing it before the resource can be used. The following snippet demonstrates this.

require('net').createServer().listen(function() { this.close(); });
// OR
clearTimeout(setTimeout(() => {}, 10));

Every new resource is assigned an ID that is unique within the scope of the current Node.js instance.

type#

The type is a string identifying the type of resource that caused init to be called. Generally, it will correspond to the name of the resource's constructor.

FSEVENTWRAP, FSREQCALLBACK, GETADDRINFOREQWRAP, GETNAMEINFOREQWRAP, HTTPINCOMINGMESSAGE,
HTTPCLIENTREQUEST, JSSTREAM, PIPECONNECTWRAP, PIPEWRAP, PROCESSWRAP, QUERYWRAP,
SHUTDOWNWRAP, SIGNALWRAP, STATWATCHER, TCPCONNECTWRAP, TCPSERVERWRAP, TCPWRAP,
TTYWRAP, UDPSENDWRAP, UDPWRAP, WRITEWRAP, ZLIB, SSLCONNECTION, PBKDF2REQUEST,
RANDOMBYTESREQUEST, TLSWRAP, Microtask, Timeout, Immediate, TickObject

There is also the PROMISE resource type, which is used to track Promise instances and asynchronous work scheduled by them.

Users are able to define their own type when using the public embedder API.

It is possible to have type name collisions. Embedders are encouraged to use unique prefixes, such as the npm package name, to prevent collisions when listening to the hooks.

triggerAsyncId#

triggerAsyncId is the asyncId of the resource that caused (or "triggered") the new resource to initialize and that caused init to call. This is different from async_hooks.executionAsyncId() that only shows when a resource was created, while triggerAsyncId shows why a resource was created.

The following is a simple demonstration of triggerAsyncId:

async_hooks.createHook({
  init(asyncId, type, triggerAsyncId) {
    const eid = async_hooks.executionAsyncId();
    fs.writeSync(
      1, `${type}(${asyncId}): trigger: ${triggerAsyncId} execution: ${eid}\n`);
  }
}).enable();

require('net').createServer((conn) => {}).listen(8080);

Output when hitting the server with nc localhost 8080:

TCPSERVERWRAP(5): trigger: 1 execution: 1
TCPWRAP(7): trigger: 5 execution: 0

The TCPSERVERWRAP is the server which receives the connections.

The TCPWRAP is the new connection from the client. When a new connection is made, the TCPWrap instance is immediately constructed. This happens outside of any JavaScript stack. (An executionAsyncId() of 0 means that it is being executed from C++ with no JavaScript stack above it.) With only that information, it would be impossible to link resources together in terms of what caused them to be created, so triggerAsyncId is given the task of propagating what resource is responsible for the new resource's existence.

resource#

resource is an object that represents the actual async resource that has been initialized. This can contain useful information that can vary based on the value of type. For instance, for the GETADDRINFOREQWRAP resource type, resource provides the host name used when looking up the IP address for the host in net.Server.listen(). The API for accessing this information is currently not considered public, but using the Embedder API, users can provide and document their own resource objects. For example, such a resource object could contain the SQL query being executed.

In the case of Promises, the resource object will have an isChainedPromise property, set to true if the promise has a parent promise, and false otherwise. For example, in the case of b = a.then(handler), a is considered a parent Promise of b. Here, b is considered a chained promise.

In some cases the resource object is reused for performance reasons, it is thus not safe to use it as a key in a WeakMap or add properties to it.

Asynchronous context example#

The following is an example with additional information about the calls to init between the before and after calls, specifically what the callback to listen() will look like. The output formatting is slightly more elaborate to make calling context easier to see.

let indent = 0;
async_hooks.createHook({
  init(asyncId, type, triggerAsyncId) {
    const eid = async_hooks.executionAsyncId();
    const indentStr = ' '.repeat(indent);
    fs.writeSync(
      1,
      `${indentStr}${type}(${asyncId}):` +
      ` trigger: ${triggerAsyncId} execution: ${eid}\n`);
  },
  before(asyncId) {
    const indentStr = ' '.repeat(indent);
    fs.writeFileSync('log.out',
                     `${indentStr}before:  ${asyncId}\n`, { flag: 'a' });
    indent += 2;
  },
  after(asyncId) {
    indent -= 2;
    const indentStr = ' '.repeat(indent);
    fs.writeFileSync('log.out',
                     `${indentStr}after:  ${asyncId}\n`, { flag: 'a' });
  },
  destroy(asyncId) {
    const indentStr = ' '.repeat(indent);
    fs.writeFileSync('log.out',
                     `${indentStr}destroy:  ${asyncId}\n`, { flag: 'a' });
  },
}).enable();

require('net').createServer(() => {}).listen(8080, () => {
  // Let's wait 10ms before logging the server started.
  setTimeout(() => {
    console.log('>>>', async_hooks.executionAsyncId());
  }, 10);
});

Output from only starting the server:

TCPSERVERWRAP(5): trigger: 1 execution: 1
TickObject(6): trigger: 5 execution: 1
before:  6
  Timeout(7): trigger: 6 execution: 6
after:   6
destroy: 6
before:  7
>>> 7
  TickObject(8): trigger: 7 execution: 7
after:   7
before:  8
after:   8

As illustrated in the example, executionAsyncId() and execution each specify the value of the current execution context; which is delineated by calls to before and after.

Only using execution to graph resource allocation results in the following:

Timeout(7) -> TickObject(6) -> root(1)

The TCPSERVERWRAP is not part of this graph, even though it was the reason for console.log() being called. This is because binding to a port without a host name is a synchronous operation, but to maintain a completely asynchronous API the user's callback is placed in a process.nextTick().

The graph only shows when a resource was created, not why, so to track the why use triggerAsyncId.

before(asyncId)#

When an asynchronous operation is initiated (such as a TCP server receiving a new connection) or completes (such as writing data to disk) a callback is called to notify the user. The before callback is called just before said callback is executed. asyncId is the unique identifier assigned to the resource about to execute the callback.

The before callback will be called 0 to N times. The before callback will typically be called 0 times if the asynchronous operation was cancelled or, for example, if no connections are received by a TCP server. Persistent asynchronous resources like a TCP server will typically call the before callback multiple times, while other operations like fs.open() will call it only once.

after(asyncId)#

Called immediately after the callback specified in before is completed.

If an uncaught exception occurs during execution of the callback, then after will run after the 'uncaughtException' event is emitted or a domain's handler runs.

destroy(asyncId)#

Called after the resource corresponding to asyncId is destroyed. It is also called asynchronously from the embedder API emitDestroy().

Some resources depend on garbage collection for cleanup, so if a reference is made to the resource object passed to init it is possible that destroy will never be called, causing a memory leak in the application. If the resource does not depend on garbage collection, then this will not be an issue.

promiseResolve(asyncId)#

Called when the resolve function passed to the Promise constructor is invoked (either directly or through other means of resolving a promise).

resolve() does not do any observable synchronous work.

The Promise is not necessarily fulfilled or rejected at this point if the Promise was resolved by assuming the state of another Promise.

new Promise((resolve) => resolve(true)).then((a) => {});

calls the following callbacks:

init for PROMISE with id 5, trigger id: 1
  promise resolve 5      # corresponds to resolve(true)
init for PROMISE with id 6, trigger id: 5  # the Promise returned by then()
  before 6               # the then() callback is entered
  promise resolve 6      # the then() callback resolves the promise by returning
  after 6

async_hooks.executionAsyncResource()#

  • Returns: <Object> The resource representing the current execution. Useful to store data within the resource.

Resource objects returned by executionAsyncResource() are most often internal Node.js handle objects with undocumented APIs. Using any functions or properties on the object is likely to crash your application and should be avoided.

Using executionAsyncResource() in the top-level execution context will return an empty object as there is no handle or request object to use, but having an object representing the top-level can be helpful.

const { open } = require('fs');
const { executionAsyncId, executionAsyncResource } = require('async_hooks');

console.log(executionAsyncId(), executionAsyncResource());  // 1 {}
open(__filename, 'r', (err, fd) => {
  console.log(executionAsyncId(), executionAsyncResource());  // 7 FSReqWrap
});

This can be used to implement continuation local storage without the use of a tracking Map to store the metadata:

const { createServer } = require('http');
const {
  executionAsyncId,
  executionAsyncResource,
  createHook
} = require('async_hooks');
const sym = Symbol('state'); // Private symbol to avoid pollution

createHook({
  init(asyncId, type, triggerAsyncId, resource) {
    const cr = executionAsyncResource();
    if (cr) {
      resource[sym] = cr[sym];
    }
  }
}).enable();

const server = createServer(function(req, res) {
  executionAsyncResource()[sym] = { state: req.url };
  setTimeout(function() {
    res.end(JSON.stringify(executionAsyncResource()[sym]));
  }, 100);
}).listen(3000);

async_hooks.executionAsyncId()#

  • Returns: <number> The asyncId of the current execution context. Useful to track when something calls.
const async_hooks = require('async_hooks');

console.log(async_hooks.executionAsyncId());  // 1 - bootstrap
fs.open(path, 'r', (err, fd) => {
  console.log(async_hooks.executionAsyncId());  // 6 - open()
});

The ID returned from executionAsyncId() is related to execution timing, not causality (which is covered by triggerAsyncId()):

const server = net.createServer((conn) => {
  // Returns the ID of the server, not of the new connection, because the
  // callback runs in the execution scope of the server's MakeCallback().
  async_hooks.executionAsyncId();

}).listen(port, () => {
  // Returns the ID of a TickObject (i.e. process.nextTick()) because all
  // callbacks passed to .listen() are wrapped in a nextTick().
  async_hooks.executionAsyncId();
});

Promise contexts may not get precise executionAsyncIds by default. See the section on promise execution tracking.

async_hooks.triggerAsyncId()#

  • Returns: <number> The ID of the resource responsible for calling the callback that is currently being executed.
const server = net.createServer((conn) => {
  // The resource that caused (or triggered) this callback to be called
  // was that of the new connection. Thus the return value of triggerAsyncId()
  // is the asyncId of "conn".
  async_hooks.triggerAsyncId();

}).listen(port, () => {
  // Even though all callbacks passed to .listen() are wrapped in a nextTick()
  // the callback itself exists because the call to the server's .listen()
  // was made. So the return value would be the ID of the server.
  async_hooks.triggerAsyncId();
});

Promise contexts may not get valid triggerAsyncIds by default. See the section on promise execution tracking.

Promise execution tracking#

By default, promise executions are not assigned asyncIds due to the relatively expensive nature of the promise introspection API provided by V8. This means that programs using promises or async/await will not get correct execution and trigger ids for promise callback contexts by default.

const ah = require('async_hooks');
Promise.resolve(1729).then(() => {
  console.log(`eid ${ah.executionAsyncId()} tid ${ah.triggerAsyncId()}`);
});
// produces:
// eid 1 tid 0

Observe that the then() callback claims to have executed in the context of the outer scope even though there was an asynchronous hop involved. Also, the triggerAsyncId value is 0, which means that we are missing context about the resource that caused (triggered) the then() callback to be executed.

Installing async hooks via async_hooks.createHook enables promise execution tracking:

const ah = require('async_hooks');
ah.createHook({ init() {} }).enable(); // forces PromiseHooks to be enabled.
Promise.resolve(1729).then(() => {
  console.log(`eid ${ah.executionAsyncId()} tid ${ah.triggerAsyncId()}`);
});
// produces:
// eid 7 tid 6

In this example, adding any actual hook function enabled the tracking of promises. There are two promises in the example above; the promise created by Promise.resolve() and the promise returned by the call to then(). In the example above, the first promise got the asyncId 6 and the latter got asyncId 7. During the execution of the then() callback, we are executing in the context of promise with asyncId 7. This promise was triggered by async resource 6.

Another subtlety with promises is that before and after callbacks are run only on chained promises. That means promises not created by then()/catch() will not have the before and after callbacks fired on them. For more details see the details of the V8 PromiseHooks API.

JavaScript Embedder API#

Library developers that handle their own asynchronous resources performing tasks like I/O, connection pooling, or managing callback queues may use the AsyncWrap JavaScript API so that all the appropriate callbacks are called.

Class: AsyncResource#

The class AsyncResource is designed to be extended by the embedder's async resources. Using this, users can easily trigger the lifetime events of their own resources.

The init hook will trigger when an AsyncResource is instantiated.

The following is an overview of the AsyncResource API.

const { AsyncResource, executionAsyncId } = require('async_hooks');

// AsyncResource() is meant to be extended. Instantiating a
// new AsyncResource() also triggers init. If triggerAsyncId is omitted then
// async_hook.executionAsyncId() is used.
const asyncResource = new AsyncResource(
  type, { triggerAsyncId: executionAsyncId(), requireManualDestroy: false }
);

// Run a function in the execution context of the resource. This will
// * establish the context of the resource
// * trigger the AsyncHooks before callbacks
// * call the provided function `fn` with the supplied arguments
// * trigger the AsyncHooks after callbacks
// * restore the original execution context
asyncResource.runInAsyncScope(fn, thisArg, ...args);

// Call AsyncHooks destroy callbacks.
asyncResource.emitDestroy();

// Return the unique ID assigned to the AsyncResource instance.
asyncResource.asyncId();

// Return the trigger ID for the AsyncResource instance.
asyncResource.triggerAsyncId();

new AsyncResource(type[, options])#

  • type <string> The type of async event.
  • options <Object>

    • triggerAsyncId <number> The ID of the execution context that created this async event. Default: executionAsyncId().
    • requireManualDestroy <boolean> If set to true, disables emitDestroy when the object is garbage collected. This usually does not need to be set (even if emitDestroy is called manually), unless the resource's asyncId is retrieved and the sensitive API's emitDestroy is called with it. When set to false, the emitDestroy call on garbage collection will only take place if there is at least one active destroy hook. Default: false.

Example usage:

class DBQuery extends AsyncResource {
  constructor(db) {
    super('DBQuery');
    this.db = db;
  }

  getInfo(query, callback) {
    this.db.get(query, (err, data) => {
      this.runInAsyncScope(callback, null, err, data);
    });
  }

  close() {
    this.db = null;
    this.emitDestroy();
  }
}

asyncResource.runInAsyncScope(fn[, thisArg, ...args])#

  • fn <Function> The function to call in the execution context of this async resource.
  • thisArg <any> The receiver to be used for the function call.
  • ...args <any> Optional arguments to pass to the function.

Call the provided function with the provided arguments in the execution context of the async resource. This will establish the context, trigger the AsyncHooks before callbacks, call the function, trigger the AsyncHooks after callbacks, and then restore the original execution context.

asyncResource.emitDestroy()#

Call all destroy hooks. This should only ever be called once. An error will be thrown if it is called more than once. This must be manually called. If the resource is left to be collected by the GC then the destroy hooks will never be called.

asyncResource.asyncId()#

  • Returns: <number> The unique asyncId assigned to the resource.

asyncResource.triggerAsyncId()#

  • Returns: <number> The same triggerAsyncId that is passed to the AsyncResource constructor.

Using AsyncResource for a Worker thread pool#

The following example shows how to use the AsyncResource class to properly provide async tracking for a Worker pool. Other resource pools, such as database connection pools, can follow a similar model.

Assuming that the task is adding two numbers, using a file named task_processor.js with the following content:

const { parentPort } = require('worker_threads');
parentPort.on('message', (task) => {
  parentPort.postMessage(task.a + task.b);
});

a Worker pool around it could use the following structure:

const { AsyncResource } = require('async_hooks');
const { EventEmitter } = require('events');
const path = require('path');
const { Worker } = require('worker_threads');

const kTaskInfo = Symbol('kTaskInfo');
const kWorkerFreedEvent = Symbol('kWorkerFreedEvent');

class WorkerPoolTaskInfo extends AsyncResource {
  constructor(callback) {
    super('WorkerPoolTaskInfo');
    this.callback = callback;
  }

  done(err, result) {
    this.runInAsyncScope(this.callback, null, err, result);
    this.emitDestroy();  // `TaskInfo`s are used only once.
  }
}

class WorkerPool extends EventEmitter {
  constructor(numThreads) {
    super();
    this.numThreads = numThreads;
    this.workers = [];
    this.freeWorkers = [];

    for (let i = 0; i < numThreads; i++)
      this.addNewWorker();
  }

  addNewWorker() {
    const worker = new Worker(path.resolve(__dirname, 'task_processor.js'));
    worker.on('message', (result) => {
      // In case of success: Call the callback that was passed to `runTask`,
      // remove the `TaskInfo` associated with the Worker, and mark it as free
      // again.
      worker[kTaskInfo].done(null, result);
      worker[kTaskInfo] = null;
      this.freeWorkers.push(worker);
      this.emit(kWorkerFreedEvent);
    });
    worker.on('error', (err) => {
      // In case of an uncaught exception: Call the callback that was passed to
      // `runTask` with the error.
      if (worker[kTaskInfo])
        worker[kTaskInfo].done(err, null);
      else
        this.emit('error', err);
      // Remove the worker from the list and start a new Worker to replace the
      // current one.
      this.workers.splice(this.workers.indexOf(worker), 1);
      this.addNewWorker();
    });
    this.workers.push(worker);
    this.freeWorkers.push(worker);
  }

  runTask(task, callback) {
    if (this.freeWorkers.length === 0) {
      // No free threads, wait until a worker thread becomes free.
      this.once(kWorkerFreedEvent, () => this.runTask(task, callback));
      return;
    }

    const worker = this.freeWorkers.pop();
    worker[kTaskInfo] = new WorkerPoolTaskInfo(callback);
    worker.postMessage(task);
  }

  close() {
    for (const worker of this.workers) worker.terminate();
  }
}

module.exports = WorkerPool;

Without the explicit tracking added by the WorkerPoolTaskInfo objects, it would appear that the callbacks are associated with the individual Worker objects. However, the creation of the Workers is not associated with the creation of the tasks and does not provide information about when tasks were scheduled.

This pool could be used as follows:

const WorkerPool = require('./worker_pool.js');
const os = require('os');

const pool = new WorkerPool(os.cpus().length);

let finished = 0;
for (let i = 0; i < 10; i++) {
  pool.runTask({ a: 42, b: 100 }, (err, result) => {
    console.log(i, err, result);
    if (++finished === 10)
      pool.close();
  });
}

Class: AsyncLocalStorage#

This class is used to create asynchronous state within callbacks and promise chains. It allows storing data throughout the lifetime of a web request or any other asynchronous duration. It is similar to thread-local storage in other languages.

The following example builds a logger that will always know the current HTTP request and uses it to display enhanced logs without needing to explicitly provide the current HTTP request to it.

const { AsyncLocalStorage } = require('async_hooks');
const http = require('http');

const kReq = 'CURRENT_REQUEST';
const asyncLocalStorage = new AsyncLocalStorage();

function log(...args) {
  const store = asyncLocalStorage.getStore();
  // Make sure the store exists and it contains a request.
  if (store && store.has(kReq)) {
    const req = store.get(kReq);
    // Prints `GET /items ERR could not do something
    console.log(req.method, req.url, ...args);
  } else {
    console.log(...args);
  }
}

http.createServer((request, response) => {
  asyncLocalStorage.run(new Map(), () => {
    const store = asyncLocalStorage.getStore();
    store.set(kReq, request);
    someAsyncOperation((err, result) => {
      if (err) {
        log('ERR', err.message);
      }
    });
  });
})
.listen(8080);

When having multiple instances of AsyncLocalStorage, they are independent from each other. It is safe to instantiate this class multiple times.

new AsyncLocalStorage()#

Creates a new instance of AsyncLocalStorage. Store is only provided within a run or a runSyncAndReturn method call.

asyncLocalStorage.disable()#

This method disables the instance of AsyncLocalStorage. All subsequent calls to asyncLocalStorage.getStore() will return undefined until asyncLocalStorage.run() or asyncLocalStorage.runSyncAndReturn() is called again.

When calling asyncLocalStorage.disable(), all current contexts linked to the instance will be exited.

Calling asyncLocalStorage.disable() is required before the asyncLocalStorage can be garbage collected. This does not apply to stores provided by the asyncLocalStorage, as those objects are garbage collected along with the corresponding async resources.

This method is to be used when the asyncLocalStorage is not in use anymore in the current process.

asyncLocalStorage.getStore()#

This method returns the current store. If this method is called outside of an asynchronous context initialized by calling asyncLocalStorage.run or asyncLocalStorage.runSyncAndReturn, it will return undefined.

asyncLocalStorage.enterWith(store)#

Calling asyncLocalStorage.enterWith(store) will transition into the context for the remainder of the current synchronous execution and will persist through any following asynchronous calls.

Example:

const store = { id: 1 };
asyncLocalStorage.enterWith(store);
asyncLocalStorage.getStore(); // Returns the store object
someAsyncOperation(() => {
  asyncLocalStorage.getStore(); // Returns the same object
});

This transition will continue for the entire synchronous execution. This means that if, for example, the context is entered within an event handler subsequent event handlers will also run within that context unless specifically bound to another context with an AsyncResource.

const store = { id: 1 };

emitter.on('my-event', () => {
  asyncLocalStorage.enterWith(store);
});
emitter.on('my-event', () => {
  asyncLocalStorage.getStore(); // Returns the same object
});

asyncLocalStorage.getStore(); // Returns undefined
emitter.emit('my-event');
asyncLocalStorage.getStore(); // Returns the same object

asyncLocalStorage.run(store, callback[, ...args])#

Calling asyncLocalStorage.run(callback) will create a new asynchronous context. Within the callback function and the asynchronous operations from the callback, asyncLocalStorage.getStore() will return the object or the primitive value passed into the store argument (known as "the store"). This store will be persistent through the following asynchronous calls.

The callback will be ran asynchronously. Optionally, arguments can be passed to the function. They will be passed to the callback function.

If an error is thrown by the callback function, it will not be caught by a try/catch block as the callback is ran in a new asynchronous resource. Also, the stacktrace will be impacted by the asynchronous call.

Example:

const store = { id: 1 };
asyncLocalStorage.run(store, () => {
  asyncLocalStorage.getStore(); // Returns the store object
  someAsyncOperation(() => {
    asyncLocalStorage.getStore(); // Returns the same object
  });
});
asyncLocalStorage.getStore(); // Returns undefined

asyncLocalStorage.exit(callback[, ...args])#

Calling asyncLocalStorage.exit(callback) will create a new asynchronous context. Within the callback function and the asynchronous operations from the callback, asyncLocalStorage.getStore() will return undefined.

The callback will be ran asynchronously. Optionally, arguments can be passed to the function. They will be passed to the callback function.

If an error is thrown by the callback function, it will not be caught by a try/catch block as the callback is ran in a new asynchronous resource. Also, the stacktrace will be impacted by the asynchronous call.

Example:

asyncLocalStorage.run('store value', () => {
  asyncLocalStorage.getStore(); // Returns 'store value'
  asyncLocalStorage.exit(() => {
    asyncLocalStorage.getStore(); // Returns undefined
  });
  asyncLocalStorage.getStore(); // Returns 'store value'
});

asyncLocalStorage.runSyncAndReturn(store, callback[, ...args])#

This methods runs a function synchronously within a context and return its return value. The store is not accessible outside of the callback function or the asynchronous operations created within the callback.

Optionally, arguments can be passed to the function. They will be passed to the callback function.

If the callback function throws an error, it will be thrown by runSyncAndReturn too. The stacktrace will not be impacted by this call and the context will be exited.

Example:

const store = { id: 2 };
try {
  asyncLocalStorage.runSyncAndReturn(store, () => {
    asyncLocalStorage.getStore(); // Returns the store object
    throw new Error();
  });
} catch (e) {
  asyncLocalStorage.getStore(); // Returns undefined
  // The error will be caught here
}

asyncLocalStorage.exitSyncAndReturn(callback[, ...args])#

This methods runs a function synchronously outside of a context and return its return value. The store is not accessible within the callback function or the asynchronous operations created within the callback.

Optionally, arguments can be passed to the function. They will be passed to the callback function.

If the callback function throws an error, it will be thrown by exitSyncAndReturn too. The stacktrace will not be impacted by this call and the context will be re-entered.

Example:

// Within a call to run or runSyncAndReturn
try {
  asyncLocalStorage.getStore(); // Returns the store object or value
  asyncLocalStorage.exitSyncAndReturn(() => {
    asyncLocalStorage.getStore(); // Returns undefined
    throw new Error();
  });
} catch (e) {
  asyncLocalStorage.getStore(); // Returns the same object or value
  // The error will be caught here
}

Choosing between run and runSyncAndReturn#

When to choose run#

run is asynchronous. It is called with a callback function that runs within a new asynchronous call. This is the most explicit behavior as everything that is executed within the callback of run (including further asynchronous operations) will have access to the store.

If an instance of AsyncLocalStorage is used for error management (for instance, with process.setUncaughtExceptionCaptureCallback), only exceptions thrown in the scope of the callback function will be associated with the context.

This method is the safest as it provides strong scoping and consistent behavior.

It cannot be promisified using util.promisify. If needed, the Promise constructor can be used:

const store = new Map(); // initialize the store
new Promise((resolve, reject) => {
  asyncLocalStorage.run(store, () => {
    someFunction((err, result) => {
      if (err) {
        return reject(err);
      }
      return resolve(result);
    });
  });
});

When to choose runSyncAndReturn#

runSyncAndReturn is synchronous. The callback function will be executed synchronously and its return value will be returned by runSyncAndReturn. The store will only be accessible from within the callback function and the asynchronous operations created within this scope. If the callback throws an error, runSyncAndReturn will throw it and it will not be associated with the context.

This method provides good scoping while being synchronous.

Usage with async/await#

If, within an async function, only one await call is to run within a context, the following pattern should be used:

async function fn() {
  await asyncLocalStorage.runSyncAndReturn(new Map(), () => {
    asyncLocalStorage.getStore().set('key', value);
    return foo(); // The return value of foo will be awaited
  });
}

In this example, the store is only available in the callback function and the functions called by foo. Outside of runSyncAndReturn, calling getStore will return undefined.