Node.js v22.11.0 documentation

Promise example#

Promise-based operations return a promise that is fulfilled when the asynchronous operation is complete.

import { unlink } from 'node:fs/promises';

try {
  await unlink('/tmp/hello');
  console.log('successfully deleted /tmp/hello');
} catch (error) {
  console.error('there was an error:', error.message);
}const { unlink } = require('node:fs/promises');

(async function(path) {
  try {
    await unlink(path);
    console.log(`successfully deleted ${path}`);
  } catch (error) {
    console.error('there was an error:', error.message);
  }
})('/tmp/hello');copy

Callback example#

The callback form takes a completion callback function as its last argument and invokes the operation asynchronously. The arguments passed to the completion callback depend on the method, but the first argument is always reserved for an exception. If the operation is completed successfully, then the first argument is null or undefined.

import { unlink } from 'node:fs';

unlink('/tmp/hello', (err) => {
  if (err) throw err;
  console.log('successfully deleted /tmp/hello');
});const { unlink } = require('node:fs');

unlink('/tmp/hello', (err) => {
  if (err) throw err;
  console.log('successfully deleted /tmp/hello');
});copy

The callback-based versions of the node:fs module APIs are preferable over the use of the promise APIs when maximal performance (both in terms of execution time and memory allocation) is required.

Synchronous example#

The synchronous APIs block the Node.js event loop and further JavaScript execution until the operation is complete. Exceptions are thrown immediately and can be handled using try…catch, or can be allowed to bubble up.

import { unlinkSync } from 'node:fs';

try {
  unlinkSync('/tmp/hello');
  console.log('successfully deleted /tmp/hello');
} catch (err) {
  // handle the error
}const { unlinkSync } = require('node:fs');

try {
  unlinkSync('/tmp/hello');
  console.log('successfully deleted /tmp/hello');
} catch (err) {
  // handle the error
}copy

Promises API#

The fs/promises API provides asynchronous file system methods that return promises.

The promise APIs use the underlying Node.js threadpool to perform file system operations off the event loop thread. These operations are not synchronized or threadsafe. Care must be taken when performing multiple concurrent modifications on the same file or data corruption may occur.

Class: FileHandle#

A <FileHandle> object is an object wrapper for a numeric file descriptor.

Instances of the <FileHandle> object are created by the fsPromises.open() method.

All <FileHandle> objects are <EventEmitter>s.

If a <FileHandle> is not closed using the filehandle.close() method, it will try to automatically close the file descriptor and emit a process warning, helping to prevent memory leaks. Please do not rely on this behavior because it can be unreliable and the file may not be closed. Instead, always explicitly close <FileHandle>s. Node.js may change this behavior in the future.

Event: 'close'#

The 'close' event is emitted when the <FileHandle> has been closed and can no longer be used.

filehandle.appendFile(data[, options])#

• data <string> | <Buffer> | <TypedArray> | <DataView> | <AsyncIterable> | <Iterable> | <Stream>
• options <Object> | <string>
  • encoding <string> | <null> Default: 'utf8'
  • flush <boolean> If true, the underlying file descriptor is flushed prior to closing it. Default: false.
• Returns: <Promise> Fulfills with undefined upon success.

Alias of filehandle.writeFile().

When operating on file handles, the mode cannot be changed from what it was set to with fsPromises.open(). Therefore, this is equivalent to filehandle.writeFile().

filehandle.chmod(mode)#

• mode <integer> the file mode bit mask.
• Returns: <Promise> Fulfills with undefined upon success.

Modifies the permissions on the file. See chmod(2).

filehandle.chown(uid, gid)#

• uid <integer> The file's new owner's user id.
• gid <integer> The file's new group's group id.
• Returns: <Promise> Fulfills with undefined upon success.

Changes the ownership of the file. A wrapper for chown(2).

filehandle.close()#

• Returns: <Promise> Fulfills with undefined upon success.

Closes the file handle after waiting for any pending operation on the handle to complete.

import { open } from 'node:fs/promises';

let filehandle;
try {
  filehandle = await open('thefile.txt', 'r');
} finally {
  await filehandle?.close();
} copy

filehandle.createReadStream([options])#

• options <Object>
  • encoding <string> Default: null
  • autoClose <boolean> Default: true
  • emitClose <boolean> Default: true
  • start <integer>
  • end <integer> Default: Infinity
  • highWaterMark <integer> Default: 64 * 1024
  • signal <AbortSignal> | <undefined> Default: undefined
• Returns: <fs.ReadStream>

Unlike the 16 KiB default highWaterMark for a <stream.Readable>, the stream returned by this method has a default highWaterMark of 64 KiB.

options can include start and end values to read a range of bytes from the file instead of the entire file. Both start and end are inclusive and start counting at 0, allowed values are in the [0, Number.MAX_SAFE_INTEGER] range. If start is omitted or undefined, filehandle.createReadStream() reads sequentially from the current file position. The encoding can be any one of those accepted by <Buffer>.

If the FileHandle points to a character device that only supports blocking reads (such as keyboard or sound card), read operations do not finish until data is available. This can prevent the process from exiting and the stream from closing naturally.

By default, the stream will emit a 'close' event after it has been destroyed. Set the emitClose option to false to change this behavior.

import { open } from 'node:fs/promises';

const fd = await open('/dev/input/event0');
// Create a stream from some character device.
const stream = fd.createReadStream();
setTimeout(() => {
  stream.close(); // This may not close the stream.
  // Artificially marking end-of-stream, as if the underlying resource had
  // indicated end-of-file by itself, allows the stream to close.
  // This does not cancel pending read operations, and if there is such an
  // operation, the process may still not be able to exit successfully
  // until it finishes.
  stream.push(null);
  stream.read(0);
}, 100); copy

If autoClose is false, then the file descriptor won't be closed, even if there's an error. It is the application's responsibility to close it and make sure there's no file descriptor leak. If autoClose is set to true (default behavior), on 'error' or 'end' the file descriptor will be closed automatically.

An example to read the last 10 bytes of a file which is 100 bytes long:

import { open } from 'node:fs/promises';

const fd = await open('sample.txt');
fd.createReadStream({ start: 90, end: 99 }); copy

filehandle.createWriteStream([options])#

• options <Object>
  • encoding <string> Default: 'utf8'
  • autoClose <boolean> Default: true
  • emitClose <boolean> Default: true
  • start <integer>
  • highWaterMark <number> Default: 16384
  • flush <boolean> If true, the underlying file descriptor is flushed prior to closing it. Default: false.
• Returns: <fs.WriteStream>

options may also include a start option to allow writing data at some position past the beginning of the file, allowed values are in the [0, Number.MAX_SAFE_INTEGER] range. Modifying a file rather than replacing it may require the flags open option to be set to r+ rather than the default r. The encoding can be any one of those accepted by <Buffer>.

If autoClose is set to true (default behavior) on 'error' or 'finish' the file descriptor will be closed automatically. If autoClose is false, then the file descriptor won't be closed, even if there's an error. It is the application's responsibility to close it and make sure there's no file descriptor leak.

By default, the stream will emit a 'close' event after it has been destroyed. Set the emitClose option to false to change this behavior.

filehandle.datasync()#

• Returns: <Promise> Fulfills with undefined upon success.

Forces all currently queued I/O operations associated with the file to the operating system's synchronized I/O completion state. Refer to the POSIX fdatasync(2) documentation for details.

Unlike filehandle.sync this method does not flush modified metadata.

filehandle.fd#

• <number> The numeric file descriptor managed by the <FileHandle> object.

filehandle.read(buffer, offset, length, position)#

• buffer <Buffer> | <TypedArray> | <DataView> A buffer that will be filled with the file data read.
• offset <integer> The location in the buffer at which to start filling. Default: 0
• length <integer> The number of bytes to read. Default: buffer.byteLength - offset
• position <integer> | <bigint> | <null> The location where to begin reading data from the file. If null or -1, data will be read from the current file position, and the position will be updated. If position is a non-negative integer, the current file position will remain unchanged. Default:: null
• Returns: <Promise> Fulfills upon success with an object with two properties:
  • bytesRead <integer> The number of bytes read
  • buffer <Buffer> | <TypedArray> | <DataView> A reference to the passed in buffer argument.

Reads data from the file and stores that in the given buffer.

If the file is not modified concurrently, the end-of-file is reached when the number of bytes read is zero.

filehandle.read([options])#

• options <Object>
  • buffer <Buffer> | <TypedArray> | <DataView> A buffer that will be filled with the file data read. Default: Buffer.alloc(16384)
  • offset <integer> The location in the buffer at which to start filling. Default: 0
  • length <integer> The number of bytes to read. Default: buffer.byteLength - offset
  • position <integer> | <bigint> | <null> The location where to begin reading data from the file. If null or -1, data will be read from the current file position, and the position will be updated. If position is a non-negative integer, the current file position will remain unchanged. Default:: null
• Returns: <Promise> Fulfills upon success with an object with two properties:
  • bytesRead <integer> The number of bytes read
  • buffer <Buffer> | <TypedArray> | <DataView> A reference to the passed in buffer argument.

Reads data from the file and stores that in the given buffer.

If the file is not modified concurrently, the end-of-file is reached when the number of bytes read is zero.

filehandle.read(buffer[, options])#

• buffer <Buffer> | <TypedArray> | <DataView> A buffer that will be filled with the file data read.
• options <Object>
  • offset <integer> The location in the buffer at which to start filling. Default: 0
  • length <integer> The number of bytes to read. Default: buffer.byteLength - offset
  • position <integer> | <bigint> | <null> The location where to begin reading data from the file. If null or -1, data will be read from the current file position, and the position will be updated. If position is a non-negative integer, the current file position will remain unchanged. Default:: null
• Returns: <Promise> Fulfills upon success with an object with two properties:
  • bytesRead <integer> The number of bytes read
  • buffer <Buffer> | <TypedArray> | <DataView> A reference to the passed in buffer argument.

Reads data from the file and stores that in the given buffer.

If the file is not modified concurrently, the end-of-file is reached when the number of bytes read is zero.

filehandle.readableWebStream([options])#

• options <Object>

  • type <string> | <undefined> Whether to open a normal or a 'bytes' stream. Default: undefined

• Returns: <ReadableStream>

Returns a ReadableStream that may be used to read the files data.

An error will be thrown if this method is called more than once or is called after the FileHandle is closed or closing.

import {
  open,
} from 'node:fs/promises';

const file = await open('./some/file/to/read');

for await (const chunk of file.readableWebStream())
  console.log(chunk);

await file.close();const {
  open,
} = require('node:fs/promises');

(async () => {
  const file = await open('./some/file/to/read');

  for await (const chunk of file.readableWebStream())
    console.log(chunk);

  await file.close();
})();copy

While the ReadableStream will read the file to completion, it will not close the FileHandle automatically. User code must still call the fileHandle.close() method.

filehandle.readFile(options)#

• options <Object> | <string>
  • encoding <string> | <null> Default: null
  • signal <AbortSignal> allows aborting an in-progress readFile
• Returns: <Promise> Fulfills upon a successful read with the contents of the file. If no encoding is specified (using options.encoding), the data is returned as a <Buffer> object. Otherwise, the data will be a string.

Asynchronously reads the entire contents of a file.

If options is a string, then it specifies the encoding.

The <FileHandle> has to support reading.

If one or more filehandle.read() calls are made on a file handle and then a filehandle.readFile() call is made, the data will be read from the current position till the end of the file. It doesn't always read from the beginning of the file.

filehandle.readLines([options])#

• options <Object>
  • encoding <string> Default: null
  • autoClose <boolean> Default: true
  • emitClose <boolean> Default: true
  • start <integer>
  • end <integer> Default: Infinity
  • highWaterMark <integer> Default: 64 * 1024
• Returns: <readline.InterfaceConstructor>

Convenience method to create a readline interface and stream over the file. See filehandle.createReadStream() for the options.

import { open } from 'node:fs/promises';

const file = await open('./some/file/to/read');

for await (const line of file.readLines()) {
  console.log(line);
}const { open } = require('node:fs/promises');

(async () => {
  const file = await open('./some/file/to/read');

  for await (const line of file.readLines()) {
    console.log(line);
  }
})();copy

filehandle.readv(buffers[, position])#

• buffers <Buffer[]> | <TypedArray[]> | <DataView[]>
• position <integer> | <null> The offset from the beginning of the file where the data should be read from. If position is not a number, the data will be read from the current position. Default: null
• Returns: <Promise> Fulfills upon success an object containing two properties:
  • bytesRead <integer> the number of bytes read
  • buffers <Buffer[]> | <TypedArray[]> | <DataView[]> property containing a reference to the buffers input.

Read from a file and write to an array of <ArrayBufferView>s

filehandle.stat([options])#

• options <Object>
  • bigint <boolean> Whether the numeric values in the returned <fs.Stats> object should be bigint. Default: false.
• Returns: <Promise> Fulfills with an <fs.Stats> for the file.

filehandle.sync()#

• Returns: <Promise> Fulfills with undefined upon success.

Request that all data for the open file descriptor is flushed to the storage device. The specific implementation is operating system and device specific. Refer to the POSIX fsync(2) documentation for more detail.

filehandle.truncate(len)#

• len <integer> Default: 0
• Returns: <Promise> Fulfills with undefined upon success.

Truncates the file.

If the file was larger than len bytes, only the first len bytes will be retained in the file.

The following example retains only the first four bytes of the file:

import { open } from 'node:fs/promises';

let filehandle = null;
try {
  filehandle = await open('temp.txt', 'r+');
  await filehandle.truncate(4);
} finally {
  await filehandle?.close();
} copy

If the file previously was shorter than len bytes, it is extended, and the extended part is filled with null bytes ('\0'):

If len is negative then 0 will be used.

filehandle.utimes(atime, mtime)#

• atime <number> | <string> | <Date>
• mtime <number> | <string> | <Date>
• Returns: <Promise>

Change the file system timestamps of the object referenced by the <FileHandle> then fulfills the promise with no arguments upon success.

filehandle.write(buffer, offset[, length[, position]])#

• buffer <Buffer> | <TypedArray> | <DataView>
• offset <integer> The start position from within buffer where the data to write begins.
• length <integer> The number of bytes from buffer to write. Default: buffer.byteLength - offset
• position <integer> | <null> The offset from the beginning of the file where the data from buffer should be written. If position is not a number, the data will be written at the current position. See the POSIX pwrite(2) documentation for more detail. Default: null
• Returns: <Promise>

Write buffer to the file.

The promise is fulfilled with an object containing two properties:

• bytesWritten <integer> the number of bytes written
• buffer <Buffer> | <TypedArray> | <DataView> a reference to the buffer written.

It is unsafe to use filehandle.write() multiple times on the same file without waiting for the promise to be fulfilled (or rejected). For this scenario, use filehandle.createWriteStream().

On Linux, positional writes do not work when the file is opened in append mode. The kernel ignores the position argument and always appends the data to the end of the file.

filehandle.write(buffer[, options])#

• buffer <Buffer> | <TypedArray> | <DataView>
• options <Object>
  • offset <integer> Default: 0
  • length <integer> Default: buffer.byteLength - offset
  • position <integer> Default: null
• Returns: <Promise>

Write buffer to the file.

Similar to the above filehandle.write function, this version takes an optional options object. If no options object is specified, it will default with the above values.

filehandle.write(string[, position[, encoding]])#

• string <string>
• position <integer> | <null> The offset from the beginning of the file where the data from string should be written. If position is not a number the data will be written at the current position. See the POSIX pwrite(2) documentation for more detail. Default: null
• encoding <string> The expected string encoding. Default: 'utf8'
• Returns: <Promise>

Write string to the file. If string is not a string, the promise is rejected with an error.

The promise is fulfilled with an object containing two properties:

• bytesWritten <integer> the number of bytes written
• buffer <string> a reference to the string written.

It is unsafe to use filehandle.write() multiple times on the same file without waiting for the promise to be fulfilled (or rejected). For this scenario, use filehandle.createWriteStream().

On Linux, positional writes do not work when the file is opened in append mode. The kernel ignores the position argument and always appends the data to the end of the file.

filehandle.writeFile(data, options)#

• data <string> | <Buffer> | <TypedArray> | <DataView> | <AsyncIterable> | <Iterable> | <Stream>
• options <Object> | <string>
  • encoding <string> | <null> The expected character encoding when data is a string. Default: 'utf8'
• Returns: <Promise>

Asynchronously writes data to a file, replacing the file if it already exists. data can be a string, a buffer, an <AsyncIterable>, or an <Iterable> object. The promise is fulfilled with no arguments upon success.

If options is a string, then it specifies the encoding.

The <FileHandle> has to support writing.

It is unsafe to use filehandle.writeFile() multiple times on the same file without waiting for the promise to be fulfilled (or rejected).

If one or more filehandle.write() calls are made on a file handle and then a filehandle.writeFile() call is made, the data will be written from the current position till the end of the file. It doesn't always write from the beginning of the file.

filehandle.writev(buffers[, position])#

• buffers <Buffer[]> | <TypedArray[]> | <DataView[]>
• position <integer> | <null> The offset from the beginning of the file where the data from buffers should be written. If position is not a number, the data will be written at the current position. Default: null
• Returns: <Promise>

Write an array of <ArrayBufferView>s to the file.

The promise is fulfilled with an object containing a two properties:

• bytesWritten <integer> the number of bytes written
• buffers <Buffer[]> | <TypedArray[]> | <DataView[]> a reference to the buffers input.

It is unsafe to call writev() multiple times on the same file without waiting for the promise to be fulfilled (or rejected).

On Linux, positional writes don't work when the file is opened in append mode. The kernel ignores the position argument and always appends the data to the end of the file.

filehandle[Symbol.asyncDispose]()#

An alias for filehandle.close().

fsPromises.access(path[, mode])#

• path <string> | <Buffer> | <URL>
• mode <integer> Default: fs.constants.F_OK
• Returns: <Promise> Fulfills with undefined upon success.

Tests a user's permissions for the file or directory specified by path. The mode argument is an optional integer that specifies the accessibility checks to be performed. mode should be either the value fs.constants.F_OK or a mask consisting of the bitwise OR of any of fs.constants.R_OK, fs.constants.W_OK, and fs.constants.X_OK (e.g. fs.constants.W_OK | fs.constants.R_OK). Check File access constants for possible values of mode.

If the accessibility check is successful, the promise is fulfilled with no value. If any of the accessibility checks fail, the promise is rejected with an <Error> object. The following example checks if the file /etc/passwd can be read and written by the current process.

import { access, constants } from 'node:fs/promises';

try {
  await access('/etc/passwd', constants.R_OK | constants.W_OK);
  console.log('can access');
} catch {
  console.error('cannot access');
} copy

Using fsPromises.access() to check for the accessibility of a file before calling fsPromises.open() is not recommended. Doing so introduces a race condition, since other processes may change the file's state between the two calls. Instead, user code should open/read/write the file directly and handle the error raised if the file is not accessible.

fsPromises.appendFile(path, data[, options])#

• path <string> | <Buffer> | <URL> | <FileHandle> filename or <FileHandle>
• data <string> | <Buffer>
• options <Object> | <string>
  • encoding <string> | <null> Default: 'utf8'
  • mode <integer> Default: 0o666
  • flag <string> See support of file system flags. Default: 'a'.
  • flush <boolean> If true, the underlying file descriptor is flushed prior to closing it. Default: false.
• Returns: <Promise> Fulfills with undefined upon success.

Asynchronously append data to a file, creating the file if it does not yet exist. data can be a string or a <Buffer>.

If options is a string, then it specifies the encoding.

The mode option only affects the newly created file. See fs.open() for more details.

The path may be specified as a <FileHandle> that has been opened for appending (using fsPromises.open()).

fsPromises.chmod(path, mode)#

• path <string> | <Buffer> | <URL>
• mode <string> | <integer>
• Returns: <Promise> Fulfills with undefined upon success.

Changes the permissions of a file.

fsPromises.chown(path, uid, gid)#

• path <string> | <Buffer> | <URL>
• uid <integer>
• gid <integer>
• Returns: <Promise> Fulfills with undefined upon success.

Changes the ownership of a file.

fsPromises.copyFile(src, dest[, mode])#

• src <string> | <Buffer> | <URL> source filename to copy
• dest <string> | <Buffer> | <URL> destination filename of the copy operation
• mode <integer> Optional modifiers that specify the behavior of the copy operation. It is possible to create a mask consisting of the bitwise OR of two or more values (e.g. fs.constants.COPYFILE_EXCL | fs.constants.COPYFILE_FICLONE) Default: 0.
  • fs.constants.COPYFILE_EXCL: The copy operation will fail if dest already exists.
  • fs.constants.COPYFILE_FICLONE: The copy operation will attempt to create a copy-on-write reflink. If the platform does not support copy-on-write, then a fallback copy mechanism is used.
  • fs.constants.COPYFILE_FICLONE_FORCE: The copy operation will attempt to create a copy-on-write reflink. If the platform does not support copy-on-write, then the operation will fail.
• Returns: <Promise> Fulfills with undefined upon success.

Asynchronously copies src to dest. By default, dest is overwritten if it already exists.

No guarantees are made about the atomicity of the copy operation. If an error occurs after the destination file has been opened for writing, an attempt will be made to remove the destination.

import { copyFile, constants } from 'node:fs/promises';

try {
  await copyFile('source.txt', 'destination.txt');
  console.log('source.txt was copied to destination.txt');
} catch {
  console.error('The file could not be copied');
}

// By using COPYFILE_EXCL, the operation will fail if destination.txt exists.
try {
  await copyFile('source.txt', 'destination.txt', constants.COPYFILE_EXCL);
  console.log('source.txt was copied to destination.txt');
} catch {
  console.error('The file could not be copied');
} copy

fsPromises.cp(src, dest[, options])#

• src <string> | <URL> source path to copy.
• dest <string> | <URL> destination path to copy to.
• options <Object>
  • dereference <boolean> dereference symlinks. Default: false.
  • errorOnExist <boolean> when force is false, and the destination exists, throw an error. Default: false.
  • filter <Function> Function to filter copied files/directories. Return true to copy the item, false to ignore it. When ignoring a directory, all of its contents will be skipped as well. Can also return a Promise that resolves to true or false Default: undefined.
    • src <string> source path to copy.
    • dest <string> destination path to copy to.
    • Returns: <boolean> | <Promise> A value that is coercible to boolean or a Promise that fulfils with such value.
  • force <boolean> overwrite existing file or directory. The copy operation will ignore errors if you set this to false and the destination exists. Use the errorOnExist option to change this behavior. Default: true.
  • mode <integer> modifiers for copy operation. Default: 0. See mode flag of fsPromises.copyFile().
  • preserveTimestamps <boolean> When true timestamps from src will be preserved. Default: false.
  • recursive <boolean> copy directories recursively Default: false
  • verbatimSymlinks <boolean> When true, path resolution for symlinks will be skipped. Default: false
• Returns: <Promise> Fulfills with undefined upon success.

Asynchronously copies the entire directory structure from src to dest, including subdirectories and files.

When copying a directory to another directory, globs are not supported and behavior is similar to cp dir1/ dir2/.

fsPromises.glob(pattern[, options])#

• pattern <string> | <string[]>
• options <Object>
  • cwd <string> current working directory. Default: process.cwd()
  • exclude <Function> Function to filter out files/directories. Return true to exclude the item, false to include it. Default: undefined.
  • withFileTypes <boolean> true if the glob should return paths as Dirents, false otherwise. Default: false.
• Returns: <AsyncIterator> An AsyncIterator that yields the paths of files that match the pattern.

import { glob } from 'node:fs/promises';

for await (const entry of glob('**/*.js'))
  console.log(entry);const { glob } = require('node:fs/promises');

(async () => {
  for await (const entry of glob('**/*.js'))
    console.log(entry);
})();copy

fsPromises.lchmod(path, mode)#

• path <string> | <Buffer> | <URL>
• mode <integer>
• Returns: <Promise> Fulfills with undefined upon success.

Changes the permissions on a symbolic link.

This method is only implemented on macOS.

fsPromises.lchown(path, uid, gid)#

• path <string> | <Buffer> | <URL>
• uid <integer>
• gid <integer>
• Returns: <Promise> Fulfills with undefined upon success.

Changes the ownership on a symbolic link.

fsPromises.lutimes(path, atime, mtime)#

• path <string> | <Buffer> | <URL>
• atime <number> | <string> | <Date>
• mtime <number> | <string> | <Date>
• Returns: <Promise> Fulfills with undefined upon success.

Changes the access and modification times of a file in the same way as fsPromises.utimes(), with the difference that if the path refers to a symbolic link, then the link is not dereferenced: instead, the timestamps of the symbolic link itself are changed.

fsPromises.link(existingPath, newPath)#

• existingPath <string> | <Buffer> | <URL>
• newPath <string> | <Buffer> | <URL>
• Returns: <Promise> Fulfills with undefined upon success.

Creates a new link from the existingPath to the newPath. See the POSIX link(2) documentation for more detail.

fsPromises.lstat(path[, options])#

• path <string> | <Buffer> | <URL>
• options <Object>
  • bigint <boolean> Whether the numeric values in the returned <fs.Stats> object should be bigint. Default: false.
• Returns: <Promise> Fulfills with the <fs.Stats> object for the given symbolic link path.

Equivalent to fsPromises.stat() unless path refers to a symbolic link, in which case the link itself is stat-ed, not the file that it refers to. Refer to the POSIX lstat(2) document for more detail.

fsPromises.mkdir(path[, options])#

• path <string> | <Buffer> | <URL>
• options <Object> | <integer>
  • recursive <boolean> Default: false
  • mode <string> | <integer> Not supported on Windows. Default: 0o777.
• Returns: <Promise> Upon success, fulfills with undefined if recursive is false, or the first directory path created if recursive is true.

Asynchronously creates a directory.

The optional options argument can be an integer specifying mode (permission and sticky bits), or an object with a mode property and a recursive property indicating whether parent directories should be created. Calling fsPromises.mkdir() when path is a directory that exists results in a rejection only when recursive is false.

import { mkdir } from 'node:fs/promises';

try {
  const projectFolder = new URL('./test/project/', import.meta.url);
  const createDir = await mkdir(projectFolder, { recursive: true });

  console.log(`created ${createDir}`);
} catch (err) {
  console.error(err.message);
}const { mkdir } = require('node:fs/promises');
const { join } = require('node:path');

async function makeDirectory() {
  const projectFolder = join(__dirname, 'test', 'project');
  const dirCreation = await mkdir(projectFolder, { recursive: true });

  console.log(dirCreation);
  return dirCreation;
}

makeDirectory().catch(console.error);copy

fsPromises.mkdtemp(prefix[, options])#

• prefix <string> | <Buffer> | <URL>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
• Returns: <Promise> Fulfills with a string containing the file system path of the newly created temporary directory.

Creates a unique temporary directory. A unique directory name is generated by appending six random characters to the end of the provided prefix. Due to platform inconsistencies, avoid trailing X characters in prefix. Some platforms, notably the BSDs, can return more than six random characters, and replace trailing X characters in prefix with random characters.

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use.

import { mkdtemp } from 'node:fs/promises';
import { join } from 'node:path';
import { tmpdir } from 'node:os';

try {
  await mkdtemp(join(tmpdir(), 'foo-'));
} catch (err) {
  console.error(err);
} copy

The fsPromises.mkdtemp() method will append the six randomly selected characters directly to the prefix string. For instance, given a directory /tmp, if the intention is to create a temporary directory within /tmp, the prefix must end with a trailing platform-specific path separator (require('node:path').sep).

fsPromises.open(path, flags[, mode])#

• path <string> | <Buffer> | <URL>
• flags <string> | <number> See support of file system flags. Default: 'r'.
• mode <string> | <integer> Sets the file mode (permission and sticky bits) if the file is created. Default: 0o666 (readable and writable)
• Returns: <Promise> Fulfills with a <FileHandle> object.

Opens a <FileHandle>.

Refer to the POSIX open(2) documentation for more detail.

Some characters (< > : " / \ | ? *) are reserved under Windows as documented by Naming Files, Paths, and Namespaces. Under NTFS, if the filename contains a colon, Node.js will open a file system stream, as described by this MSDN page.

fsPromises.opendir(path[, options])#

• path <string> | <Buffer> | <URL>
• options <Object>
  • encoding <string> | <null> Default: 'utf8'
  • bufferSize <number> Number of directory entries that are buffered internally when reading from the directory. Higher values lead to better performance but higher memory usage. Default: 32
  • recursive <boolean> Resolved Dir will be an <AsyncIterable> containing all sub files and directories. Default: false
• Returns: <Promise> Fulfills with an <fs.Dir>.

Asynchronously open a directory for iterative scanning. See the POSIX opendir(3) documentation for more detail.

Creates an <fs.Dir>, which contains all further functions for reading from and cleaning up the directory.

The encoding option sets the encoding for the path while opening the directory and subsequent read operations.

Example using async iteration:

import { opendir } from 'node:fs/promises';

try {
  const dir = await opendir('./');
  for await (const dirent of dir)
    console.log(dirent.name);
} catch (err) {
  console.error(err);
} copy

When using the async iterator, the <fs.Dir> object will be automatically closed after the iterator exits.

fsPromises.readdir(path[, options])#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
  • withFileTypes <boolean> Default: false
  • recursive <boolean> If true, reads the contents of a directory recursively. In recursive mode, it will list all files, sub files, and directories. Default: false.
• Returns: <Promise> Fulfills with an array of the names of the files in the directory excluding '.' and '..'.

Reads the contents of a directory.

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use for the filenames. If the encoding is set to 'buffer', the filenames returned will be passed as <Buffer> objects.

If options.withFileTypes is set to true, the returned array will contain <fs.Dirent> objects.

import { readdir } from 'node:fs/promises';

try {
  const files = await readdir(path);
  for (const file of files)
    console.log(file);
} catch (err) {
  console.error(err);
} copy

fsPromises.readFile(path[, options])#

• path <string> | <Buffer> | <URL> | <FileHandle> filename or FileHandle
• options <Object> | <string>
  • encoding <string> | <null> Default: null
  • flag <string> See support of file system flags. Default: 'r'.
  • signal <AbortSignal> allows aborting an in-progress readFile
• Returns: <Promise> Fulfills with the contents of the file.

Asynchronously reads the entire contents of a file.

If no encoding is specified (using options.encoding), the data is returned as a <Buffer> object. Otherwise, the data will be a string.

If options is a string, then it specifies the encoding.

When the path is a directory, the behavior of fsPromises.readFile() is platform-specific. On macOS, Linux, and Windows, the promise will be rejected with an error. On FreeBSD, a representation of the directory's contents will be returned.

An example of reading a package.json file located in the same directory of the running code:

import { readFile } from 'node:fs/promises';
try {
  const filePath = new URL('./package.json', import.meta.url);
  const contents = await readFile(filePath, { encoding: 'utf8' });
  console.log(contents);
} catch (err) {
  console.error(err.message);
}const { readFile } = require('node:fs/promises');
const { resolve } = require('node:path');
async function logFile() {
  try {
    const filePath = resolve('./package.json');
    const contents = await readFile(filePath, { encoding: 'utf8' });
    console.log(contents);
  } catch (err) {
    console.error(err.message);
  }
}
logFile();copy

It is possible to abort an ongoing readFile using an <AbortSignal>. If a request is aborted the promise returned is rejected with an AbortError:

import { readFile } from 'node:fs/promises';

try {
  const controller = new AbortController();
  const { signal } = controller;
  const promise = readFile(fileName, { signal });

  // Abort the request before the promise settles.
  controller.abort();

  await promise;
} catch (err) {
  // When a request is aborted - err is an AbortError
  console.error(err);
} copy

Aborting an ongoing request does not abort individual operating system requests but rather the internal buffering fs.readFile performs.

Any specified <FileHandle> has to support reading.

fsPromises.readlink(path[, options])#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
• Returns: <Promise> Fulfills with the linkString upon success.

Reads the contents of the symbolic link referred to by path. See the POSIX readlink(2) documentation for more detail. The promise is fulfilled with the linkString upon success.

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use for the link path returned. If the encoding is set to 'buffer', the link path returned will be passed as a <Buffer> object.

fsPromises.realpath(path[, options])#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
• Returns: <Promise> Fulfills with the resolved path upon success.

Determines the actual location of path using the same semantics as the fs.realpath.native() function.

Only paths that can be converted to UTF8 strings are supported.

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use for the path. If the encoding is set to 'buffer', the path returned will be passed as a <Buffer> object.

On Linux, when Node.js is linked against musl libc, the procfs file system must be mounted on /proc in order for this function to work. Glibc does not have this restriction.

fsPromises.rename(oldPath, newPath)#

• oldPath <string> | <Buffer> | <URL>
• newPath <string> | <Buffer> | <URL>
• Returns: <Promise> Fulfills with undefined upon success.

Renames oldPath to newPath.

fsPromises.rmdir(path[, options])#

• path <string> | <Buffer> | <URL>
• options <Object>
  • maxRetries <integer> If an EBUSY, EMFILE, ENFILE, ENOTEMPTY, or EPERM error is encountered, Node.js retries the operation with a linear backoff wait of retryDelay milliseconds longer on each try. This option represents the number of retries. This option is ignored if the recursive option is not true. Default: 0.
  • recursive <boolean> If true, perform a recursive directory removal. In recursive mode, operations are retried on failure. Default: false. Deprecated.
  • retryDelay <integer> The amount of time in milliseconds to wait between retries. This option is ignored if the recursive option is not true. Default: 100.
• Returns: <Promise> Fulfills with undefined upon success.

Removes the directory identified by path.

Using fsPromises.rmdir() on a file (not a directory) results in the promise being rejected with an ENOENT error on Windows and an ENOTDIR error on POSIX.

To get a behavior similar to the rm -rf Unix command, use fsPromises.rm() with options { recursive: true, force: true }.

fsPromises.rm(path[, options])#

• path <string> | <Buffer> | <URL>
• options <Object>
  • force <boolean> When true, exceptions will be ignored if path does not exist. Default: false.
  • maxRetries <integer> If an EBUSY, EMFILE, ENFILE, ENOTEMPTY, or EPERM error is encountered, Node.js will retry the operation with a linear backoff wait of retryDelay milliseconds longer on each try. This option represents the number of retries. This option is ignored if the recursive option is not true. Default: 0.
  • recursive <boolean> If true, perform a recursive directory removal. In recursive mode operations are retried on failure. Default: false.
  • retryDelay <integer> The amount of time in milliseconds to wait between retries. This option is ignored if the recursive option is not true. Default: 100.
• Returns: <Promise> Fulfills with undefined upon success.

Removes files and directories (modeled on the standard POSIX rm utility).

fsPromises.stat(path[, options])#

• path <string> | <Buffer> | <URL>
• options <Object>
  • bigint <boolean> Whether the numeric values in the returned <fs.Stats> object should be bigint. Default: false.
• Returns: <Promise> Fulfills with the <fs.Stats> object for the given path.

fsPromises.statfs(path[, options])#

• path <string> | <Buffer> | <URL>
• options <Object>
  • bigint <boolean> Whether the numeric values in the returned <fs.StatFs> object should be bigint. Default: false.
• Returns: <Promise> Fulfills with the <fs.StatFs> object for the given path.

fsPromises.symlink(target, path[, type])#

• target <string> | <Buffer> | <URL>
• path <string> | <Buffer> | <URL>
• type <string> | <null> Default: null
• Returns: <Promise> Fulfills with undefined upon success.

Creates a symbolic link.

The type argument is only used on Windows platforms and can be one of 'dir', 'file', or 'junction'. If the type argument is not a string, Node.js will autodetect target type and use 'file' or 'dir'. If the target does not exist, 'file' will be used. Windows junction points require the destination path to be absolute. When using 'junction', the target argument will automatically be normalized to absolute path. Junction points on NTFS volumes can only point to directories.

fsPromises.truncate(path[, len])#

• path <string> | <Buffer> | <URL>
• len <integer> Default: 0
• Returns: <Promise> Fulfills with undefined upon success.

Truncates (shortens or extends the length) of the content at path to len bytes.

fsPromises.unlink(path)#

• path <string> | <Buffer> | <URL>
• Returns: <Promise> Fulfills with undefined upon success.

If path refers to a symbolic link, then the link is removed without affecting the file or directory to which that link refers. If the path refers to a file path that is not a symbolic link, the file is deleted. See the POSIX unlink(2) documentation for more detail.

fsPromises.utimes(path, atime, mtime)#

• path <string> | <Buffer> | <URL>
• atime <number> | <string> | <Date>
• mtime <number> | <string> | <Date>
• Returns: <Promise> Fulfills with undefined upon success.

Change the file system timestamps of the object referenced by path.

The atime and mtime arguments follow these rules:

• Values can be either numbers representing Unix epoch time, Dates, or a numeric string like '123456789.0'.
• If the value can not be converted to a number, or is NaN, Infinity, or -Infinity, an Error will be thrown.

fsPromises.watch(filename[, options])#

• filename <string> | <Buffer> | <URL>
• options <string> | <Object>
  • persistent <boolean> Indicates whether the process should continue to run as long as files are being watched. Default: true.
  • recursive <boolean> Indicates whether all subdirectories should be watched, or only the current directory. This applies when a directory is specified, and only on supported platforms (See caveats). Default: false.
  • encoding <string> Specifies the character encoding to be used for the filename passed to the listener. Default: 'utf8'.
  • signal <AbortSignal> An <AbortSignal> used to signal when the watcher should stop.
• Returns: <AsyncIterator> of objects with the properties:
  • eventType <string> The type of change
  • filename <string> | <Buffer> | <null> The name of the file changed.

Returns an async iterator that watches for changes on filename, where filename is either a file or a directory.

const { watch } = require('node:fs/promises');

const ac = new AbortController();
const { signal } = ac;
setTimeout(() => ac.abort(), 10000);

(async () => {
  try {
    const watcher = watch(__filename, { signal });
    for await (const event of watcher)
      console.log(event);
  } catch (err) {
    if (err.name === 'AbortError')
      return;
    throw err;
  }
})(); copy

On most platforms, 'rename' is emitted whenever a filename appears or disappears in the directory.

All the caveats for fs.watch() also apply to fsPromises.watch().

fsPromises.writeFile(file, data[, options])#

• file <string> | <Buffer> | <URL> | <FileHandle> filename or FileHandle
• data <string> | <Buffer> | <TypedArray> | <DataView> | <AsyncIterable> | <Iterable> | <Stream>
• options <Object> | <string>
  • encoding <string> | <null> Default: 'utf8'
  • mode <integer> Default: 0o666
  • flag <string> See support of file system flags. Default: 'w'.
  • flush <boolean> If all data is successfully written to the file, and flush is true, filehandle.sync() is used to flush the data. Default: false.
  • signal <AbortSignal> allows aborting an in-progress writeFile
• Returns: <Promise> Fulfills with undefined upon success.

Asynchronously writes data to a file, replacing the file if it already exists. data can be a string, a buffer, an <AsyncIterable>, or an <Iterable> object.

The encoding option is ignored if data is a buffer.

If options is a string, then it specifies the encoding.

The mode option only affects the newly created file. See fs.open() for more details.

Any specified <FileHandle> has to support writing.

It is unsafe to use fsPromises.writeFile() multiple times on the same file without waiting for the promise to be settled.

Similarly to fsPromises.readFile - fsPromises.writeFile is a convenience method that performs multiple write calls internally to write the buffer passed to it. For performance sensitive code consider using fs.createWriteStream() or filehandle.createWriteStream().

It is possible to use an <AbortSignal> to cancel an fsPromises.writeFile(). Cancelation is "best effort", and some amount of data is likely still to be written.

import { writeFile } from 'node:fs/promises';
import { Buffer } from 'node:buffer';

try {
  const controller = new AbortController();
  const { signal } = controller;
  const data = new Uint8Array(Buffer.from('Hello Node.js'));
  const promise = writeFile('message.txt', data, { signal });

  // Abort the request before the promise settles.
  controller.abort();

  await promise;
} catch (err) {
  // When a request is aborted - err is an AbortError
  console.error(err);
} copy

Aborting an ongoing request does not abort individual operating system requests but rather the internal buffering fs.writeFile performs.

fsPromises.constants#

• <Object>

Returns an object containing commonly used constants for file system operations. The object is the same as fs.constants. See FS constants for more details.

Callback API#

The callback APIs perform all operations asynchronously, without blocking the event loop, then invoke a callback function upon completion or error.

The callback APIs use the underlying Node.js threadpool to perform file system operations off the event loop thread. These operations are not synchronized or threadsafe. Care must be taken when performing multiple concurrent modifications on the same file or data corruption may occur.

fs.access(path[, mode], callback)#

• path <string> | <Buffer> | <URL>
• mode <integer> Default: fs.constants.F_OK
• callback <Function>
  • err <Error>

Tests a user's permissions for the file or directory specified by path. The mode argument is an optional integer that specifies the accessibility checks to be performed. mode should be either the value fs.constants.F_OK or a mask consisting of the bitwise OR of any of fs.constants.R_OK, fs.constants.W_OK, and fs.constants.X_OK (e.g. fs.constants.W_OK | fs.constants.R_OK). Check File access constants for possible values of mode.

The final argument, callback, is a callback function that is invoked with a possible error argument. If any of the accessibility checks fail, the error argument will be an Error object. The following examples check if package.json exists, and if it is readable or writable.

import { access, constants } from 'node:fs';

const file = 'package.json';

// Check if the file exists in the current directory.
access(file, constants.F_OK, (err) => {
  console.log(`${file} ${err ? 'does not exist' : 'exists'}`);
});

// Check if the file is readable.
access(file, constants.R_OK, (err) => {
  console.log(`${file} ${err ? 'is not readable' : 'is readable'}`);
});

// Check if the file is writable.
access(file, constants.W_OK, (err) => {
  console.log(`${file} ${err ? 'is not writable' : 'is writable'}`);
});

// Check if the file is readable and writable.
access(file, constants.R_OK | constants.W_OK, (err) => {
  console.log(`${file} ${err ? 'is not' : 'is'} readable and writable`);
}); copy

Do not use fs.access() to check for the accessibility of a file before calling fs.open(), fs.readFile(), or fs.writeFile(). Doing so introduces a race condition, since other processes may change the file's state between the two calls. Instead, user code should open/read/write the file directly and handle the error raised if the file is not accessible.

write (NOT RECOMMENDED)

import { access, open, close } from 'node:fs';

access('myfile', (err) => {
  if (!err) {
    console.error('myfile already exists');
    return;
  }

  open('myfile', 'wx', (err, fd) => {
    if (err) throw err;

    try {
      writeMyData(fd);
    } finally {
      close(fd, (err) => {
        if (err) throw err;
      });
    }
  });
}); copy

write (RECOMMENDED)

import { open, close } from 'node:fs';

open('myfile', 'wx', (err, fd) => {
  if (err) {
    if (err.code === 'EEXIST') {
      console.error('myfile already exists');
      return;
    }

    throw err;
  }

  try {
    writeMyData(fd);
  } finally {
    close(fd, (err) => {
      if (err) throw err;
    });
  }
}); copy

read (NOT RECOMMENDED)

import { access, open, close } from 'node:fs';
access('myfile', (err) => {
  if (err) {
    if (err.code === 'ENOENT') {
      console.error('myfile does not exist');
      return;
    }

    throw err;
  }

  open('myfile', 'r', (err, fd) => {
    if (err) throw err;

    try {
      readMyData(fd);
    } finally {
      close(fd, (err) => {
        if (err) throw err;
      });
    }
  });
}); copy

read (RECOMMENDED)

import { open, close } from 'node:fs';

open('myfile', 'r', (err, fd) => {
  if (err) {
    if (err.code === 'ENOENT') {
      console.error('myfile does not exist');
      return;
    }

    throw err;
  }

  try {
    readMyData(fd);
  } finally {
    close(fd, (err) => {
      if (err) throw err;
    });
  }
}); copy

The "not recommended" examples above check for accessibility and then use the file; the "recommended" examples are better because they use the file directly and handle the error, if any.

In general, check for the accessibility of a file only if the file will not be used directly, for example when its accessibility is a signal from another process.

On Windows, access-control policies (ACLs) on a directory may limit access to a file or directory. The fs.access() function, however, does not check the ACL and therefore may report that a path is accessible even if the ACL restricts the user from reading or writing to it.

fs.appendFile(path, data[, options], callback)#

• path <string> | <Buffer> | <URL> | <number> filename or file descriptor
• data <string> | <Buffer>
• options <Object> | <string>
  • encoding <string> | <null> Default: 'utf8'
  • mode <integer> Default: 0o666
  • flag <string> See support of file system flags. Default: 'a'.
  • flush <boolean> If true, the underlying file descriptor is flushed prior to closing it. Default: false.
• callback <Function>
  • err <Error>

Asynchronously append data to a file, creating the file if it does not yet exist. data can be a string or a <Buffer>.

The mode option only affects the newly created file. See fs.open() for more details.

import { appendFile } from 'node:fs';

appendFile('message.txt', 'data to append', (err) => {
  if (err) throw err;
  console.log('The "data to append" was appended to file!');
}); copy

If options is a string, then it specifies the encoding:

import { appendFile } from 'node:fs';

appendFile('message.txt', 'data to append', 'utf8', callback); copy

The path may be specified as a numeric file descriptor that has been opened for appending (using fs.open() or fs.openSync()). The file descriptor will not be closed automatically.

import { open, close, appendFile } from 'node:fs';

function closeFd(fd) {
  close(fd, (err) => {
    if (err) throw err;
  });
}

open('message.txt', 'a', (err, fd) => {
  if (err) throw err;

  try {
    appendFile(fd, 'data to append', 'utf8', (err) => {
      closeFd(fd);
      if (err) throw err;
    });
  } catch (err) {
    closeFd(fd);
    throw err;
  }
}); copy

fs.chmod(path, mode, callback)#

• path <string> | <Buffer> | <URL>
• mode <string> | <integer>
• callback <Function>
  • err <Error>

Asynchronously changes the permissions of a file. No arguments other than a possible exception are given to the completion callback.

See the POSIX chmod(2) documentation for more detail.

import { chmod } from 'node:fs';

chmod('my_file.txt', 0o775, (err) => {
  if (err) throw err;
  console.log('The permissions for file "my_file.txt" have been changed!');
}); copy

File modes#

The mode argument used in both the fs.chmod() and fs.chmodSync() methods is a numeric bitmask created using a logical OR of the following constants:

An easier method of constructing the mode is to use a sequence of three octal digits (e.g. 765). The left-most digit (7 in the example), specifies the permissions for the file owner. The middle digit (6 in the example), specifies permissions for the group. The right-most digit (5 in the example), specifies the permissions for others.

For example, the octal value 0o765 means:

• The owner may read, write, and execute the file.
• The group may read and write the file.
• Others may read and execute the file.

When using raw numbers where file modes are expected, any value larger than 0o777 may result in platform-specific behaviors that are not supported to work consistently. Therefore constants like S_ISVTX, S_ISGID, or S_ISUID are not exposed in fs.constants.

Caveats: on Windows only the write permission can be changed, and the distinction among the permissions of group, owner, or others is not implemented.

fs.chown(path, uid, gid, callback)#

• path <string> | <Buffer> | <URL>
• uid <integer>
• gid <integer>
• callback <Function>
  • err <Error>

Asynchronously changes owner and group of a file. No arguments other than a possible exception are given to the completion callback.

See the POSIX chown(2) documentation for more detail.

fs.close(fd[, callback])#

• fd <integer>
• callback <Function>
  • err <Error>

Closes the file descriptor. No arguments other than a possible exception are given to the completion callback.

Calling fs.close() on any file descriptor (fd) that is currently in use through any other fs operation may lead to undefined behavior.

See the POSIX close(2) documentation for more detail.

fs.copyFile(src, dest[, mode], callback)#

• src <string> | <Buffer> | <URL> source filename to copy
• dest <string> | <Buffer> | <URL> destination filename of the copy operation
• mode <integer> modifiers for copy operation. Default: 0.
• callback <Function>
  • err <Error>

Asynchronously copies src to dest. By default, dest is overwritten if it already exists. No arguments other than a possible exception are given to the callback function. Node.js makes no guarantees about the atomicity of the copy operation. If an error occurs after the destination file has been opened for writing, Node.js will attempt to remove the destination.

mode is an optional integer that specifies the behavior of the copy operation. It is possible to create a mask consisting of the bitwise OR of two or more values (e.g. fs.constants.COPYFILE_EXCL | fs.constants.COPYFILE_FICLONE).

• fs.constants.COPYFILE_EXCL: The copy operation will fail if dest already exists.
• fs.constants.COPYFILE_FICLONE: The copy operation will attempt to create a copy-on-write reflink. If the platform does not support copy-on-write, then a fallback copy mechanism is used.
• fs.constants.COPYFILE_FICLONE_FORCE: The copy operation will attempt to create a copy-on-write reflink. If the platform does not support copy-on-write, then the operation will fail.

import { copyFile, constants } from 'node:fs';

function callback(err) {
  if (err) throw err;
  console.log('source.txt was copied to destination.txt');
}

// destination.txt will be created or overwritten by default.
copyFile('source.txt', 'destination.txt', callback);

// By using COPYFILE_EXCL, the operation will fail if destination.txt exists.
copyFile('source.txt', 'destination.txt', constants.COPYFILE_EXCL, callback); copy

fs.cp(src, dest[, options], callback)#

• src <string> | <URL> source path to copy.
• dest <string> | <URL> destination path to copy to.
• options <Object>
  • dereference <boolean> dereference symlinks. Default: false.
  • errorOnExist <boolean> when force is false, and the destination exists, throw an error. Default: false.
  • filter <Function> Function to filter copied files/directories. Return true to copy the item, false to ignore it. When ignoring a directory, all of its contents will be skipped as well. Can also return a Promise that resolves to true or false Default: undefined.
    • src <string> source path to copy.
    • dest <string> destination path to copy to.
    • Returns: <boolean> | <Promise> A value that is coercible to boolean or a Promise that fulfils with such value.
  • force <boolean> overwrite existing file or directory. The copy operation will ignore errors if you set this to false and the destination exists. Use the errorOnExist option to change this behavior. Default: true.
  • mode <integer> modifiers for copy operation. Default: 0. See mode flag of fs.copyFile().
  • preserveTimestamps <boolean> When true timestamps from src will be preserved. Default: false.
  • recursive <boolean> copy directories recursively Default: false
  • verbatimSymlinks <boolean> When true, path resolution for symlinks will be skipped. Default: false
• callback <Function>
  • err <Error>

Asynchronously copies the entire directory structure from src to dest, including subdirectories and files.

When copying a directory to another directory, globs are not supported and behavior is similar to cp dir1/ dir2/.

fs.createReadStream(path[, options])#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • flags <string> See support of file system flags. Default: 'r'.
  • encoding <string> Default: null
  • fd <integer> | <FileHandle> Default: null
  • mode <integer> Default: 0o666
  • autoClose <boolean> Default: true
  • emitClose <boolean> Default: true
  • start <integer>
  • end <integer> Default: Infinity
  • highWaterMark <integer> Default: 64 * 1024
  • fs <Object> | <null> Default: null
  • signal <AbortSignal> | <null> Default: null
• Returns: <fs.ReadStream>

Unlike the 16 KiB default highWaterMark for a <stream.Readable>, the stream returned by this method has a default highWaterMark of 64 KiB.

options can include start and end values to read a range of bytes from the file instead of the entire file. Both start and end are inclusive and start counting at 0, allowed values are in the [0, Number.MAX_SAFE_INTEGER] range. If fd is specified and start is omitted or undefined, fs.createReadStream() reads sequentially from the current file position. The encoding can be any one of those accepted by <Buffer>.

If fd is specified, ReadStream will ignore the path argument and will use the specified file descriptor. This means that no 'open' event will be emitted. fd should be blocking; non-blocking fds should be passed to <net.Socket>.

If fd points to a character device that only supports blocking reads (such as keyboard or sound card), read operations do not finish until data is available. This can prevent the process from exiting and the stream from closing naturally.

By default, the stream will emit a 'close' event after it has been destroyed. Set the emitClose option to false to change this behavior.

By providing the fs option, it is possible to override the corresponding fs implementations for open, read, and close. When providing the fs option, an override for read is required. If no fd is provided, an override for open is also required. If autoClose is true, an override for close is also required.

import { createReadStream } from 'node:fs';

// Create a stream from some character device.
const stream = createReadStream('/dev/input/event0');
setTimeout(() => {
  stream.close(); // This may not close the stream.
  // Artificially marking end-of-stream, as if the underlying resource had
  // indicated end-of-file by itself, allows the stream to close.
  // This does not cancel pending read operations, and if there is such an
  // operation, the process may still not be able to exit successfully
  // until it finishes.
  stream.push(null);
  stream.read(0);
}, 100); copy

If autoClose is false, then the file descriptor won't be closed, even if there's an error. It is the application's responsibility to close it and make sure there's no file descriptor leak. If autoClose is set to true (default behavior), on 'error' or 'end' the file descriptor will be closed automatically.

mode sets the file mode (permission and sticky bits), but only if the file was created.

An example to read the last 10 bytes of a file which is 100 bytes long:

import { createReadStream } from 'node:fs';

createReadStream('sample.txt', { start: 90, end: 99 }); copy

If options is a string, then it specifies the encoding.

fs.createWriteStream(path[, options])#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • flags <string> See support of file system flags. Default: 'w'.
  • encoding <string> Default: 'utf8'
  • fd <integer> | <FileHandle> Default: null
  • mode <integer> Default: 0o666
  • autoClose <boolean> Default: true
  • emitClose <boolean> Default: true
  • start <integer>
  • fs <Object> | <null> Default: null
  • signal <AbortSignal> | <null> Default: null
  • highWaterMark <number> Default: 16384
  • flush <boolean> If true, the underlying file descriptor is flushed prior to closing it. Default: false.
• Returns: <fs.WriteStream>

options may also include a start option to allow writing data at some position past the beginning of the file, allowed values are in the [0, Number.MAX_SAFE_INTEGER] range. Modifying a file rather than replacing it may require the flags option to be set to r+ rather than the default w. The encoding can be any one of those accepted by <Buffer>.

If autoClose is set to true (default behavior) on 'error' or 'finish' the file descriptor will be closed automatically. If autoClose is false, then the file descriptor won't be closed, even if there's an error. It is the application's responsibility to close it and make sure there's no file descriptor leak.

By default, the stream will emit a 'close' event after it has been destroyed. Set the emitClose option to false to change this behavior.

By providing the fs option it is possible to override the corresponding fs implementations for open, write, writev, and close. Overriding write() without writev() can reduce performance as some optimizations (_writev()) will be disabled. When providing the fs option, overrides for at least one of write and writev are required. If no fd option is supplied, an override for open is also required. If autoClose is true, an override for close is also required.

Like <fs.ReadStream>, if fd is specified, <fs.WriteStream> will ignore the path argument and will use the specified file descriptor. This means that no 'open' event will be emitted. fd should be blocking; non-blocking fds should be passed to <net.Socket>.

If options is a string, then it specifies the encoding.

fs.exists(path, callback)#

• path <string> | <Buffer> | <URL>
• callback <Function>
  • exists <boolean>

Test whether or not the element at the given path exists by checking with the file system. Then call the callback argument with either true or false:

import { exists } from 'node:fs';

exists('/etc/passwd', (e) => {
  console.log(e ? 'it exists' : 'no passwd!');
}); copy

The parameters for this callback are not consistent with other Node.js callbacks. Normally, the first parameter to a Node.js callback is an err parameter, optionally followed by other parameters. The fs.exists() callback has only one boolean parameter. This is one reason fs.access() is recommended instead of fs.exists().

If path is a symbolic link, it is followed. Thus, if path exists but points to a non-existent element, the callback will receive the value false.

Using fs.exists() to check for the existence of a file before calling fs.open(), fs.readFile(), or fs.writeFile() is not recommended. Doing so introduces a race condition, since other processes may change the file's state between the two calls. Instead, user code should open/read/write the file directly and handle the error raised if the file does not exist.

write (NOT RECOMMENDED)

import { exists, open, close } from 'node:fs';

exists('myfile', (e) => {
  if (e) {
    console.error('myfile already exists');
  } else {
    open('myfile', 'wx', (err, fd) => {
      if (err) throw err;

      try {
        writeMyData(fd);
      } finally {
        close(fd, (err) => {
          if (err) throw err;
        });
      }
    });
  }
}); copy

write (RECOMMENDED)

import { open, close } from 'node:fs';
open('myfile', 'wx', (err, fd) => {
  if (err) {
    if (err.code === 'EEXIST') {
      console.error('myfile already exists');
      return;
    }

    throw err;
  }

  try {
    writeMyData(fd);
  } finally {
    close(fd, (err) => {
      if (err) throw err;
    });
  }
}); copy

read (NOT RECOMMENDED)

import { open, close, exists } from 'node:fs';

exists('myfile', (e) => {
  if (e) {
    open('myfile', 'r', (err, fd) => {
      if (err) throw err;

      try {
        readMyData(fd);
      } finally {
        close(fd, (err) => {
          if (err) throw err;
        });
      }
    });
  } else {
    console.error('myfile does not exist');
  }
}); copy

read (RECOMMENDED)

import { open, close } from 'node:fs';

open('myfile', 'r', (err, fd) => {
  if (err) {
    if (err.code === 'ENOENT') {
      console.error('myfile does not exist');
      return;
    }

    throw err;
  }

  try {
    readMyData(fd);
  } finally {
    close(fd, (err) => {
      if (err) throw err;
    });
  }
}); copy

The "not recommended" examples above check for existence and then use the file; the "recommended" examples are better because they use the file directly and handle the error, if any.

In general, check for the existence of a file only if the file won't be used directly, for example when its existence is a signal from another process.

fs.fchmod(fd, mode, callback)#

• fd <integer>
• mode <string> | <integer>
• callback <Function>
  • err <Error>

Sets the permissions on the file. No arguments other than a possible exception are given to the completion callback.

See the POSIX fchmod(2) documentation for more detail.

fs.fchown(fd, uid, gid, callback)#

• fd <integer>
• uid <integer>
• gid <integer>
• callback <Function>
  • err <Error>

Sets the owner of the file. No arguments other than a possible exception are given to the completion callback.

See the POSIX fchown(2) documentation for more detail.

fs.fdatasync(fd, callback)#

• fd <integer>
• callback <Function>
  • err <Error>

Forces all currently queued I/O operations associated with the file to the operating system's synchronized I/O completion state. Refer to the POSIX fdatasync(2) documentation for details. No arguments other than a possible exception are given to the completion callback.

fs.fstat(fd[, options], callback)#

• fd <integer>
• options <Object>
  • bigint <boolean> Whether the numeric values in the returned <fs.Stats> object should be bigint. Default: false.
• callback <Function>
  • err <Error>
  • stats <fs.Stats>

Invokes the callback with the <fs.Stats> for the file descriptor.

See the POSIX fstat(2) documentation for more detail.

fs.fsync(fd, callback)#

• fd <integer>
• callback <Function>
  • err <Error>

Request that all data for the open file descriptor is flushed to the storage device. The specific implementation is operating system and device specific. Refer to the POSIX fsync(2) documentation for more detail. No arguments other than a possible exception are given to the completion callback.

fs.ftruncate(fd[, len], callback)#

• fd <integer>
• len <integer> Default: 0
• callback <Function>
  • err <Error>

Truncates the file descriptor. No arguments other than a possible exception are given to the completion callback.

See the POSIX ftruncate(2) documentation for more detail.

If the file referred to by the file descriptor was larger than len bytes, only the first len bytes will be retained in the file.

For example, the following program retains only the first four bytes of the file:

import { open, close, ftruncate } from 'node:fs';

function closeFd(fd) {
  close(fd, (err) => {
    if (err) throw err;
  });
}

open('temp.txt', 'r+', (err, fd) => {
  if (err) throw err;

  try {
    ftruncate(fd, 4, (err) => {
      closeFd(fd);
      if (err) throw err;
    });
  } catch (err) {
    closeFd(fd);
    if (err) throw err;
  }
}); copy

If the file previously was shorter than len bytes, it is extended, and the extended part is filled with null bytes ('\0'):

If len is negative then 0 will be used.

fs.futimes(fd, atime, mtime, callback)#

• fd <integer>
• atime <number> | <string> | <Date>
• mtime <number> | <string> | <Date>
• callback <Function>
  • err <Error>

Change the file system timestamps of the object referenced by the supplied file descriptor. See fs.utimes().

fs.glob(pattern[, options], callback)#

• pattern <string> | <string[]>

• options <Object>

  • cwd <string> current working directory. Default: process.cwd()
  • exclude <Function> Function to filter out files/directories. Return true to exclude the item, false to include it. Default: undefined.
  • withFileTypes <boolean> true if the glob should return paths as Dirents, false otherwise. Default: false.

• callback <Function>

  • err <Error>

• Retrieves the files matching the specified pattern.

import { glob } from 'node:fs';

glob('**/*.js', (err, matches) => {
  if (err) throw err;
  console.log(matches);
});const { glob } = require('node:fs');

glob('**/*.js', (err, matches) => {
  if (err) throw err;
  console.log(matches);
});copy

fs.lchmod(path, mode, callback)#

• path <string> | <Buffer> | <URL>
• mode <integer>
• callback <Function>
  • err <Error> | <AggregateError>

Changes the permissions on a symbolic link. No arguments other than a possible exception are given to the completion callback.

This method is only implemented on macOS.

See the POSIX lchmod(2) documentation for more detail.

fs.lchown(path, uid, gid, callback)#

• path <string> | <Buffer> | <URL>
• uid <integer>
• gid <integer>
• callback <Function>
  • err <Error>

Set the owner of the symbolic link. No arguments other than a possible exception are given to the completion callback.

See the POSIX lchown(2) documentation for more detail.

fs.lutimes(path, atime, mtime, callback)#

• path <string> | <Buffer> | <URL>
• atime <number> | <string> | <Date>
• mtime <number> | <string> | <Date>
• callback <Function>
  • err <Error>

Changes the access and modification times of a file in the same way as fs.utimes(), with the difference that if the path refers to a symbolic link, then the link is not dereferenced: instead, the timestamps of the symbolic link itself are changed.

No arguments other than a possible exception are given to the completion callback.

fs.link(existingPath, newPath, callback)#

• existingPath <string> | <Buffer> | <URL>
• newPath <string> | <Buffer> | <URL>
• callback <Function>
  • err <Error>

Creates a new link from the existingPath to the newPath. See the POSIX link(2) documentation for more detail. No arguments other than a possible exception are given to the completion callback.

fs.lstat(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <Object>
  • bigint <boolean> Whether the numeric values in the returned <fs.Stats> object should be bigint. Default: false.
• callback <Function>
  • err <Error>
  • stats <fs.Stats>

Retrieves the <fs.Stats> for the symbolic link referred to by the path. The callback gets two arguments (err, stats) where stats is a <fs.Stats> object. lstat() is identical to stat(), except that if path is a symbolic link, then the link itself is stat-ed, not the file that it refers to.

See the POSIX lstat(2) documentation for more details.

fs.mkdir(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <Object> | <integer>
  • recursive <boolean> Default: false
  • mode <string> | <integer> Not supported on Windows. Default: 0o777.
• callback <Function>
  • err <Error>
  • path <string> | <undefined> Present only if a directory is created with recursive set to true.

Asynchronously creates a directory.

The callback is given a possible exception and, if recursive is true, the first directory path created, (err[, path]). path can still be undefined when recursive is true, if no directory was created (for instance, if it was previously created).

The optional options argument can be an integer specifying mode (permission and sticky bits), or an object with a mode property and a recursive property indicating whether parent directories should be created. Calling fs.mkdir() when path is a directory that exists results in an error only when recursive is false. If recursive is false and the directory exists, an EEXIST error occurs.

import { mkdir } from 'node:fs';

// Create ./tmp/a/apple, regardless of whether ./tmp and ./tmp/a exist.
mkdir('./tmp/a/apple', { recursive: true }, (err) => {
  if (err) throw err;
}); copy

On Windows, using fs.mkdir() on the root directory even with recursion will result in an error:

import { mkdir } from 'node:fs';

mkdir('/', { recursive: true }, (err) => {
  // => [Error: EPERM: operation not permitted, mkdir 'C:\']
}); copy

See the POSIX mkdir(2) documentation for more details.

fs.mkdtemp(prefix[, options], callback)#

• prefix <string> | <Buffer> | <URL>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
• callback <Function>
  • err <Error>
  • directory <string>

Creates a unique temporary directory.

Generates six random characters to be appended behind a required prefix to create a unique temporary directory. Due to platform inconsistencies, avoid trailing X characters in prefix. Some platforms, notably the BSDs, can return more than six random characters, and replace trailing X characters in prefix with random characters.

The created directory path is passed as a string to the callback's second parameter.

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use.

import { mkdtemp } from 'node:fs';
import { join } from 'node:path';
import { tmpdir } from 'node:os';

mkdtemp(join(tmpdir(), 'foo-'), (err, directory) => {
  if (err) throw err;
  console.log(directory);
  // Prints: /tmp/foo-itXde2 or C:\Users\...\AppData\Local\Temp\foo-itXde2
}); copy

The fs.mkdtemp() method will append the six randomly selected characters directly to the prefix string. For instance, given a directory /tmp, if the intention is to create a temporary directory within /tmp, the prefix must end with a trailing platform-specific path separator (require('node:path').sep).

import { tmpdir } from 'node:os';
import { mkdtemp } from 'node:fs';

// The parent directory for the new temporary directory
const tmpDir = tmpdir();

// This method is *INCORRECT*:
mkdtemp(tmpDir, (err, directory) => {
  if (err) throw err;
  console.log(directory);
  // Will print something similar to `/tmpabc123`.
  // A new temporary directory is created at the file system root
  // rather than *within* the /tmp directory.
});

// This method is *CORRECT*:
import { sep } from 'node:path';
mkdtemp(`${tmpDir}${sep}`, (err, directory) => {
  if (err) throw err;
  console.log(directory);
  // Will print something similar to `/tmp/abc123`.
  // A new temporary directory is created within
  // the /tmp directory.
}); copy

fs.open(path[, flags[, mode]], callback)#

• path <string> | <Buffer> | <URL>
• flags <string> | <number> See support of file system flags. Default: 'r'.
• mode <string> | <integer> Default: 0o666 (readable and writable)
• callback <Function>
  • err <Error>
  • fd <integer>

Asynchronous file open. See the POSIX open(2) documentation for more details.

mode sets the file mode (permission and sticky bits), but only if the file was created. On Windows, only the write permission can be manipulated; see fs.chmod().

The callback gets two arguments (err, fd).

Some characters (< > : " / \ | ? *) are reserved under Windows as documented by Naming Files, Paths, and Namespaces. Under NTFS, if the filename contains a colon, Node.js will open a file system stream, as described by this MSDN page.

Functions based on fs.open() exhibit this behavior as well: fs.writeFile(), fs.readFile(), etc.

fs.openAsBlob(path[, options])#

• path <string> | <Buffer> | <URL>
• options <Object>
  • type <string> An optional mime type for the blob.
• Returns: <Promise> Fulfills with a <Blob> upon success.

Returns a <Blob> whose data is backed by the given file.

The file must not be modified after the <Blob> is created. Any modifications will cause reading the <Blob> data to fail with a DOMException error. Synchronous stat operations on the file when the Blob is created, and before each read in order to detect whether the file data has been modified on disk.

import { openAsBlob } from 'node:fs';

const blob = await openAsBlob('the.file.txt');
const ab = await blob.arrayBuffer();
blob.stream();const { openAsBlob } = require('node:fs');

(async () => {
  const blob = await openAsBlob('the.file.txt');
  const ab = await blob.arrayBuffer();
  blob.stream();
})();copy

fs.opendir(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <Object>
  • encoding <string> | <null> Default: 'utf8'
  • bufferSize <number> Number of directory entries that are buffered internally when reading from the directory. Higher values lead to better performance but higher memory usage. Default: 32
  • recursive <boolean> Default: false
• callback <Function>
  • err <Error>
  • dir <fs.Dir>

Asynchronously open a directory. See the POSIX opendir(3) documentation for more details.

Creates an <fs.Dir>, which contains all further functions for reading from and cleaning up the directory.

The encoding option sets the encoding for the path while opening the directory and subsequent read operations.

fs.read(fd, buffer, offset, length, position, callback)#

• fd <integer>
• buffer <Buffer> | <TypedArray> | <DataView> The buffer that the data will be written to.
• offset <integer> The position in buffer to write the data to.
• length <integer> The number of bytes to read.
• position <integer> | <bigint> | <null> Specifies where to begin reading from in the file. If position is null or -1 , data will be read from the current file position, and the file position will be updated. If position is a non-negative integer, the file position will be unchanged.
• callback <Function>
  • err <Error>
  • bytesRead <integer>
  • buffer <Buffer>

Read data from the file specified by fd.

The callback is given the three arguments, (err, bytesRead, buffer).

If the file is not modified concurrently, the end-of-file is reached when the number of bytes read is zero.

If this method is invoked as its util.promisify()ed version, it returns a promise for an Object with bytesRead and buffer properties.

The fs.read() method reads data from the file specified by the file descriptor (fd). The length argument indicates the maximum number of bytes that Node.js will attempt to read from the kernel. However, the actual number of bytes read (bytesRead) can be lower than the specified length for various reasons.

For example:

• If the file is shorter than the specified length, bytesRead will be set to the actual number of bytes read.
• If the file encounters EOF (End of File) before the buffer could be filled, Node.js will read all available bytes until EOF is encountered, and the bytesRead parameter in the callback will indicate the actual number of bytes read, which may be less than the specified length.
• If the file is on a slow network filesystem or encounters any other issue during reading, bytesRead can be lower than the specified length.

Therefore, when using fs.read(), it's important to check the bytesRead value to determine how many bytes were actually read from the file. Depending on your application logic, you may need to handle cases where bytesRead is lower than the specified length, such as by wrapping the read call in a loop if you require a minimum amount of bytes.

This behavior is similar to the POSIX preadv2 function.

fs.read(fd[, options], callback)#

• fd <integer>
• options <Object>
  • buffer <Buffer> | <TypedArray> | <DataView> Default: Buffer.alloc(16384)
  • offset <integer> Default: 0
  • length <integer> Default: buffer.byteLength - offset
  • position <integer> | <bigint> | <null> Default: null
• callback <Function>
  • err <Error>
  • bytesRead <integer>
  • buffer <Buffer>

Similar to the fs.read() function, this version takes an optional options object. If no options object is specified, it will default with the above values.

fs.read(fd, buffer[, options], callback)#

• fd <integer>
• buffer <Buffer> | <TypedArray> | <DataView> The buffer that the data will be written to.
• options <Object>
  • offset <integer> Default: 0
  • length <integer> Default: buffer.byteLength - offset
  • position <integer> | <bigint> Default: null
• callback <Function>
  • err <Error>
  • bytesRead <integer>
  • buffer <Buffer>

Similar to the fs.read() function, this version takes an optional options object. If no options object is specified, it will default with the above values.

fs.readdir(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
  • withFileTypes <boolean> Default: false
  • recursive <boolean> If true, reads the contents of a directory recursively. In recursive mode, it will list all files, sub files and directories. Default: false.
• callback <Function>
  • err <Error>
  • files <string[]> | <Buffer[]> | <fs.Dirent[]>

Reads the contents of a directory. The callback gets two arguments (err, files) where files is an array of the names of the files in the directory excluding '.' and '..'.

See the POSIX readdir(3) documentation for more details.

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use for the filenames passed to the callback. If the encoding is set to 'buffer', the filenames returned will be passed as <Buffer> objects.

If options.withFileTypes is set to true, the files array will contain <fs.Dirent> objects.

fs.readFile(path[, options], callback)#

• path <string> | <Buffer> | <URL> | <integer> filename or file descriptor
• options <Object> | <string>
  • encoding <string> | <null> Default: null
  • flag <string> See support of file system flags. Default: 'r'.
  • signal <AbortSignal> allows aborting an in-progress readFile
• callback <Function>
  • err <Error> | <AggregateError>
  • data <string> | <Buffer>

Asynchronously reads the entire contents of a file.

import { readFile } from 'node:fs';

readFile('/etc/passwd', (err, data) => {
  if (err) throw err;
  console.log(data);
}); copy

The callback is passed two arguments (err, data), where data is the contents of the file.

If no encoding is specified, then the raw buffer is returned.

If options is a string, then it specifies the encoding:

import { readFile } from 'node:fs';

readFile('/etc/passwd', 'utf8', callback); copy

When the path is a directory, the behavior of fs.readFile() and fs.readFileSync() is platform-specific. On macOS, Linux, and Windows, an error will be returned. On FreeBSD, a representation of the directory's contents will be returned.

import { readFile } from 'node:fs';

// macOS, Linux, and Windows
readFile('<directory>', (err, data) => {
  // => [Error: EISDIR: illegal operation on a directory, read <directory>]
});

//  FreeBSD
readFile('<directory>', (err, data) => {
  // => null, <data>
}); copy

It is possible to abort an ongoing request using an AbortSignal. If a request is aborted the callback is called with an AbortError:

import { readFile } from 'node:fs';

const controller = new AbortController();
const signal = controller.signal;
readFile(fileInfo[0].name, { signal }, (err, buf) => {
  // ...
});
// When you want to abort the request
controller.abort(); copy

The fs.readFile() function buffers the entire file. To minimize memory costs, when possible prefer streaming via fs.createReadStream().

Aborting an ongoing request does not abort individual operating system requests but rather the internal buffering fs.readFile performs.

File descriptors#

1. Any specified file descriptor has to support reading.
2. If a file descriptor is specified as the path, it will not be closed automatically.
3. The reading will begin at the current position. For example, if the file already had 'Hello World' and six bytes are read with the file descriptor, the call to fs.readFile() with the same file descriptor, would give 'World', rather than 'Hello World'.

Performance Considerations#

The fs.readFile() method asynchronously reads the contents of a file into memory one chunk at a time, allowing the event loop to turn between each chunk. This allows the read operation to have less impact on other activity that may be using the underlying libuv thread pool but means that it will take longer to read a complete file into memory.

The additional read overhead can vary broadly on different systems and depends on the type of file being read. If the file type is not a regular file (a pipe for instance) and Node.js is unable to determine an actual file size, each read operation will load on 64 KiB of data. For regular files, each read will process 512 KiB of data.

For applications that require as-fast-as-possible reading of file contents, it is better to use fs.read() directly and for application code to manage reading the full contents of the file itself.

The Node.js GitHub issue #25741 provides more information and a detailed analysis on the performance of fs.readFile() for multiple file sizes in different Node.js versions.

fs.readlink(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
• callback <Function>
  • err <Error>
  • linkString <string> | <Buffer>

Reads the contents of the symbolic link referred to by path. The callback gets two arguments (err, linkString).

See the POSIX readlink(2) documentation for more details.

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use for the link path passed to the callback. If the encoding is set to 'buffer', the link path returned will be passed as a <Buffer> object.

fs.readv(fd, buffers[, position], callback)#

• fd <integer>
• buffers <ArrayBufferView[]>
• position <integer> | <null> Default: null
• callback <Function>
  • err <Error>
  • bytesRead <integer>
  • buffers <ArrayBufferView[]>

Read from a file specified by fd and write to an array of ArrayBufferViews using readv().

position is the offset from the beginning of the file from where data should be read. If typeof position !== 'number', the data will be read from the current position.

The callback will be given three arguments: err, bytesRead, and buffers. bytesRead is how many bytes were read from the file.

If this method is invoked as its util.promisify()ed version, it returns a promise for an Object with bytesRead and buffers properties.

fs.realpath(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
• callback <Function>
  • err <Error>
  • resolvedPath <string> | <Buffer>

Asynchronously computes the canonical pathname by resolving ., .., and symbolic links.

A canonical pathname is not necessarily unique. Hard links and bind mounts can expose a file system entity through many pathnames.

This function behaves like realpath(3), with some exceptions:

1. No case conversion is performed on case-insensitive file systems.

2. The maximum number of symbolic links is platform-independent and generally (much) higher than what the native realpath(3) implementation supports.

The callback gets two arguments (err, resolvedPath). May use process.cwd to resolve relative paths.

Only paths that can be converted to UTF8 strings are supported.

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use for the path passed to the callback. If the encoding is set to 'buffer', the path returned will be passed as a <Buffer> object.

If path resolves to a socket or a pipe, the function will return a system dependent name for that object.

A path that does not exist results in an ENOENT error. error.path is the absolute file path.

fs.realpath.native(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <string> | <Object>
  • encoding <string> Default: 'utf8'
• callback <Function>
  • err <Error>
  • resolvedPath <string> | <Buffer>

Asynchronous realpath(3).

The callback gets two arguments (err, resolvedPath).

Only paths that can be converted to UTF8 strings are supported.

The optional options argument can be a string specifying an encoding, or an object with an encoding property specifying the character encoding to use for the path passed to the callback. If the encoding is set to 'buffer', the path returned will be passed as a <Buffer> object.

On Linux, when Node.js is linked against musl libc, the procfs file system must be mounted on /proc in order for this function to work. Glibc does not have this restriction.

fs.rename(oldPath, newPath, callback)#

• oldPath <string> | <Buffer> | <URL>
• newPath <string> | <Buffer> | <URL>
• callback <Function>
  • err <Error>

Asynchronously rename file at oldPath to the pathname provided as newPath. In the case that newPath already exists, it will be overwritten. If there is a directory at newPath, an error will be raised instead. No arguments other than a possible exception are given to the completion callback.

See also: rename(2).

import { rename } from 'node:fs';

rename('oldFile.txt', 'newFile.txt', (err) => {
  if (err) throw err;
  console.log('Rename complete!');
}); copy

fs.rmdir(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <Object>
  • maxRetries <integer> If an EBUSY, EMFILE, ENFILE, ENOTEMPTY, or EPERM error is encountered, Node.js retries the operation with a linear backoff wait of retryDelay milliseconds longer on each try. This option represents the number of retries. This option is ignored if the recursive option is not true. Default: 0.
  • recursive <boolean> If true, perform a recursive directory removal. In recursive mode, operations are retried on failure. Default: false. Deprecated.
  • retryDelay <integer> The amount of time in milliseconds to wait between retries. This option is ignored if the recursive option is not true. Default: 100.
• callback <Function>
  • err <Error>

Asynchronous rmdir(2). No arguments other than a possible exception are given to the completion callback.

Using fs.rmdir() on a file (not a directory) results in an ENOENT error on Windows and an ENOTDIR error on POSIX.

To get a behavior similar to the rm -rf Unix command, use fs.rm() with options { recursive: true, force: true }.

fs.rm(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <Object>
  • force <boolean> When true, exceptions will be ignored if path does not exist. Default: false.
  • maxRetries <integer> If an EBUSY, EMFILE, ENFILE, ENOTEMPTY, or EPERM error is encountered, Node.js will retry the operation with a linear backoff wait of retryDelay milliseconds longer on each try. This option represents the number of retries. This option is ignored if the recursive option is not true. Default: 0.
  • recursive <boolean> If true, perform a recursive removal. In recursive mode operations are retried on failure. Default: false.
  • retryDelay <integer> The amount of time in milliseconds to wait between retries. This option is ignored if the recursive option is not true. Default: 100.
• callback <Function>
  • err <Error>

Asynchronously removes files and directories (modeled on the standard POSIX rm utility). No arguments other than a possible exception are given to the completion callback.

fs.stat(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <Object>
  • bigint <boolean> Whether the numeric values in the returned <fs.Stats> object should be bigint. Default: false.
• callback <Function>
  • err <Error>
  • stats <fs.Stats>

Asynchronous stat(2). The callback gets two arguments (err, stats) where stats is an <fs.Stats> object.

In case of an error, the err.code will be one of Common System Errors.

fs.stat() follows symbolic links. Use fs.lstat() to look at the links themselves.

Using fs.stat() to check for the existence of a file before calling fs.open(), fs.readFile(), or fs.writeFile() is not recommended. Instead, user code should open/read/write the file directly and handle the error raised if the file is not available.

To check if a file exists without manipulating it afterwards, fs.access() is recommended.

For example, given the following directory structure:

- txtDir
-- file.txt
- app.js copy

The next program will check for the stats of the given paths:

import { stat } from 'node:fs';

const pathsToCheck = ['./txtDir', './txtDir/file.txt'];

for (let i = 0; i < pathsToCheck.length; i++) {
  stat(pathsToCheck[i], (err, stats) => {
    console.log(stats.isDirectory());
    console.log(stats);
  });
} copy

The resulting output will resemble:

true
Stats {
  dev: 16777220,
  mode: 16877,
  nlink: 3,
  uid: 501,
  gid: 20,
  rdev: 0,
  blksize: 4096,
  ino: 14214262,
  size: 96,
  blocks: 0,
  atimeMs: 1561174653071.963,
  mtimeMs: 1561174614583.3518,
  ctimeMs: 1561174626623.5366,
  birthtimeMs: 1561174126937.2893,
  atime: 2019-06-22T03:37:33.072Z,
  mtime: 2019-06-22T03:36:54.583Z,
  ctime: 2019-06-22T03:37:06.624Z,
  birthtime: 2019-06-22T03:28:46.937Z
}
false
Stats {
  dev: 16777220,
  mode: 33188,
  nlink: 1,
  uid: 501,
  gid: 20,
  rdev: 0,
  blksize: 4096,
  ino: 14214074,
  size: 8,
  blocks: 8,
  atimeMs: 1561174616618.8555,
  mtimeMs: 1561174614584,
  ctimeMs: 1561174614583.8145,
  birthtimeMs: 1561174007710.7478,
  atime: 2019-06-22T03:36:56.619Z,
  mtime: 2019-06-22T03:36:54.584Z,
  ctime: 2019-06-22T03:36:54.584Z,
  birthtime: 2019-06-22T03:26:47.711Z
} copy

fs.statfs(path[, options], callback)#

• path <string> | <Buffer> | <URL>
• options <Object>
  • bigint <boolean> Whether the numeric values in the returned <fs.StatFs> object should be bigint. Default: false.
• callback <Function>
  • err <Error>
  • stats <fs.StatFs>

Asynchronous statfs(2). Returns information about the mounted file system which contains path. The callback gets two arguments (err, stats) where stats is an <fs.StatFs> object.

In case of an error, the err.code will be one of Common System Errors.

fs.symlink(target, path[, type], callback)#

• target <string> | <Buffer> | <URL>
• path <string> | <Buffer> | <URL>
• type <string> | <null> Default: null
• callback <Function>
  • err <Error>

Creates the link called path pointing to target. No arguments other than a possible exception are given to the completion callback.

See the POSIX symlink(2) documentation for more details.

The type argument is only available on Windows and ignored on other platforms. It can be set to 'dir', 'file', or 'junction'. If the type argument is not a string, Node.js will autodetect target type and use 'file' or 'dir'. If the target does not exist, 'file' will be used. Windows junction points require the destination path to be absolute. When using 'junction', the target argument will automatically be normalized to absolute path. Junction points on NTFS volumes can only point to directories.

Relative targets are relative to the link's parent directory.

import { symlink } from 'node:fs';

symlink('./mew', './mewtwo', callback); copy

The above example creates a symbolic link mewtwo which points to mew in the same directory:

$ tree .
.
├── mew
└── mewtwo -> ./mew copy

fs.truncate(path[, len], callback)#

• path <string> | <Buffer> | <URL>
• len <integer> Default: 0
• callback <Function>
  • err <Error> | <AggregateError>